Castle Creations Mamba Micro X 12.6V Esc, 2A Peak Bec

This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control

FUNCTIONS:
For 1/18 scale 2 or 4 wheel drive vehicles weighing approximately
    2.25lbs (1.02kg)
Sturdy BEC (battery remover circuit) deals with high-draw
    digital servos
Adjustable settings include;
    Throttle Punch Control
    Braking Curve Reverse Type
    Drag Brake Motor Type
    Auto LiPo Cutoff
Programmable Auxiliary Wire (AUX) enables changes to a number of
    settings such as torque control and max throttle from a compatible
    transmitter

INCLUDES:
Mamba Micro ESC
Motor Leads with 3.5mm Bullet Connectors
Pretinned Battery Leads (need adapter to mate w/selected
    battery, 4mm Castle Creations adapters advised)
On/Off Change
Receiver Adapter
Direction Brochure

REQUIRES:
Compatible Motor and LiPo Battery, advised battery capability for
    1/18 scale vehicles is 1500mAh, 30C or greater constant
    discharge

SPECIFICATIONS:
Input Voltage Range: Min. TWO LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Change: Waterproof
Measurements: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without adapter

COMMENTS:
Not planned for operation while submerged in liquid. If unit is
    operated in damp conditions, rinse with fresh water to eliminate
    dirt or corrosives, then fully dry unit.