Castle Creations Sv3 Sidewinder Waterproof 1:10 12V Esc & 1406-5700Kv Sensored Mo

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
and 1406 5700Kv Sensored Brushless Motor.
**NOT for use in 4WD brief course trucks.**

FUNCTIONS:
Sidewinder SV3 12V ESC, CSEM0015
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows ability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in nearly every environment (not intended for
    operation while submerged in liquid)
Compatible with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

    1406 5700Kv Sensored Brushless Motor, CSEC5700
For 2WD brief course trucks on TWO LiPos geared conservatively,
    1/10 scale 2WD stadium trucks and buggies on TWO for slamming and
    minimal runs on 3S LiPos with conservative gearing, likewise ideal for
    1/10 scale on road automobiles running on TWO and 3S LiPo power
    Four pole configuration for optimal performance at high RPM

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector
    On/Off Switch, and Instructions
1406 4600Kv Sensored Brushless Motor with Sensor Wire

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
Input Voltage Range: 2-3S LiPo, 6-8 cell NiMH
Kv: 5700
Max. RPM: 100,000
Max. Advised Automobile Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Size: 1.4" (36mm)
Weight with Wires: 7.1oz (202g)
Shaft Size: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Installing Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet