Castle Creations Sv3 Sidewinder Waterproof 1:10 12V Esc & 1406-5700Kv Sensored Mo

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
and 1406 5700Kv Sensored Brushless Motor.
**NOT for use in 4WD short course trucks.**

FEATURES:
Sidewinder SV3 12V ESC, CSEM0015
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows ability through Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in almost every environment (not meant for
    operation while immersed in liquid)
Suitable with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

    1406 5700Kv Sensored Brushless Motor, CSEC5700
For 2WD short course trucks on 2S LiPos tailored conservatively,
    1/10 scale 2WD stadium trucks and buggies on 2S for slamming and
    restricted work on 3S LiPos with conservative tailoring, likewise ideal for
    1/10 scale on road automobiles running on 2S and 3S LiPo power
    4 pole configuration for maximum effectiveness at high RPM

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port
    On/Off Switch, and Instructions
1406 4600Kv Sensored Brushless Motor with Sensor Wire

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
Input Voltage Range: 2-3S LiPo, 6-8 cell NiMH
Kv: 5700
Max. RPM: 100,000
Max. Advised Automobile Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 7.1oz (202g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Installing Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet