Castle Creations Sidewinder 3 Waterproof 1:10Th 12V Sport Car Esc

This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control.

FEATURES:
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for usage in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming ability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for usage in nearly every environment (not meant for
    operation while submerged in liquid)
Compatible with the Castle Creations 14xx series NeuCastle motors
Reversible with reverse lockout

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector
    On/Off Change, and Instructions

NEEDS:
Battery ports

SPECIFICATIONS:
Input Voltage: TWO LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector

Below is a excellent thing that numerous others have purchased the same time.

Push Rod Assmbld W/Rod Ends (2) For Use W/#5359 Revo

These are the (optional) Steel Pushrods for the Rocker Arms
for the REVO from Traxxas
These go between the Rocker Arms and the Lower Suspension Arms

FEATURES:
Black steel building and construction

INCLUDES:
Two Pushrods w/pre-installed rod ends and balls

NEEDS:
Setting up on the automobile

SPECIFICATIONS:
Length: 5.4" (137mm) end to end consisting of rod ends
Diameter: 0.20" (5mm)

COMMENTS:
For rod ends only utilize TRAC5347

This thing compliments the above discussed thing.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Remover by Castle Creations.

FEATURES:
Eliminates the need for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level appropriate for the receiver and servos

INCLUDES:
One CC BEC receiver battery remover

NEEDS:
Installation in the aircraft

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (TWO to 6S LiPo)
Current output: 12 volts input = 7 amps* constant, 10 amp peak;
    24 volts input = 5 amps* constant, 7 amp peak
    *Scores are identified with a 5mph air flow on the BEC
Selectable Output: 4.8 - 9.0V by means of the Castle Link (offered individually)
    Default voltage is 5.1V

This thing compliments the above discussed thing.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Spider Brushed Motor.

FEATURES:
High-strength upgraded ferrite magnets
Legal for rock crawling competitions
Totally rebuildable
Double accuracy ball bearings
120 day restricted warranty

INCLUDES:
Tekin T35 HD 35 Turn Rock Spider Brushed Motor

NEEDS:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending upon automobile

SPECIFICATIONS:
Input Voltage: 3S LiPo or 10-cell NiMH battery
Measurements: 2.07 x 1.42" (52.7 x 36mm)
Shaft Diameter: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)