Castle Creations X-Series Sensor Harness

    This is the Castle Creations X Series Sensor Harness.

FEATURES:
Allows sensored brushless motors to be run with sensored-capable
    Mamba X-Series ESCs
Easy to install; remove sensor dust cover from ESC, plug harness
    into ESC and plug sensor wire of motor into harness

INCLUDES:
X Series Sensor Harness

SPECS:
Length: 1.3" (34mm) not including connectors

Frequently purchased with the item that you are presently reading about.

Mamba X Sensored 25.2V Waterproof Esc W/ 8A Peak Bec, Dataloggin

This is the Castle Creations Mamba X Extreme 1/10 scale Water resistant ESC.

FEATURES:
2S - 6S input voltage variety
Compatible with 1/10 - 1/8 scale automobiles weighing less that 9lbs
    (4kg), including numerous extreme 1/10 scale setups and 1/8 scale race
    buggies
Smartsense uses motor's sensing units for smooth starts, excellent torque
    and low-speed drivability - then transitions to the sensorless
    mode with electronic timing, Smartsense immediately advances
    timing for peak efficiency throughout all driving conditions
On-the-fly modifications can be made through the AUX wire when enabled
    in Castle Link, then settings can be tuned from transmitter while
    driving
Recordable real-time information such as RPM, battery existing and voltage,
    ESC and motor temperature, throttle input and more
Audible notifies
CNC aluminum case
12AWG high hair count silicone insulated battery wires
One year limited service warranty through Castle Creations starting at date
    of purchase

INCLUDES:
Mamba X Severe 1/10 scale Electronic Speed Control
Changeable Wire Harness with Receiver Wire, AUX Wire, Fan Port,
    and Waterproof Switch
Changeable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
4mm Gold Plated Bullet Motor Connectors

NEEDS:
Motor such as the Castle 1406, 1410 and 1415 sensored motors
Battery Connectors

SPECS:
Input Voltage Range: 2S - 6S LiPo
BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 535V
Programmable: Completely programmable with Castle Link USB Adapter, and
    downloadable Casle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Measurements: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Automobile Weight: 9lbs (4kg) with batteries, all set to
    run

COMMENTS:
Water resistant under typical operation. Not planned for operation when
    entirely immersed in water.