Blade Torque Tube (2): 180 CFX

Often acquired with the thing that you are currently reading about.

Main Gear: 180 CFX




Want one more terrific thing to compliment the above discussed thing?

Gear Set: H2060




Want one more terrific thing to compliment the above discussed thing?




Introduction


Weighing just 4 grams, the SH2060 can producing approximately 11.4 oz-in of torque with transit times as low as .07 sec. This potent mix of power and speed makes it an outstanding option for ultra micro CP helis designed for 3D aerobatics.







Specs


Size Category: Minis and Micros
Type: Digital
Application: Cyclic Servo: Helicopter
Torque: 9 oz-in @4.8V, 11.4 oz-in @6V
Speed: 0.08 sec/60 deg @ 4.8V; .07 sec/60 deg @ 6V, at no load
Length: 0.77 in (19.6mm)
Width: 0.32 in (8.15mm)
Height: 0.98 in (25mm)
Weight: 0.14 oz (4g)
Bushing Or Bearing: Bushing
Connector Type: JST-ZHR connector
Gear Type: Nylon
Gear Product: Nylon
Existing Draw Idle: 2mA @ 4.8V; 0.18mA @ 6.0V
Existing Draw Stall: 2.4mA @ 4.8V; 2.21mA @ 6.0V









This thing praises the main item right here.






This is a amazing enhancement to the thing currently being reviewed.

Rotor Head Linkage Set: 180 CFX




Often acquired with the thing that you are currently reading about.




Functions



Optimized servo geometry for flawless controlAS3X® technology with piro-compensationReliable Castle Creations Talon 15 ESCRigid carbon fiber side frames deliver a solid structureIntegrated bearing block servo mountsDigital high-speed Spektrum™ nanolite rotary servos for lasting precisionSpektrum™ DSMX® AR6335 nanolite receiver with AS3X flybarless technologyPowerful, 5800Kv brushless outrunner motorHigh-output 450mAh 3S 11.1V 30C Li-Po flight battery (included)Efficient torque-tube drive tail with ball-bearing supportAluminum tail boom and one-piece tail case designRequires a 6+ channel transmitter with Spektrum DSM2®/DSMX® technology and a suitable Li-Po battery charger - both sold individually




Introduction


From the masters of micro-heli innovation is a 3D machine that breaks all the rules of efficiency. That’s due to the fact that the Blade® 180 CFX loads everything you’d get out of a 700-size, pro-class electric heli into a ballistic machine you can 3D just about anywhere. Digital, rotary servos are mounted inside carbon fiber frames with optimized servo geometry. Our Spektrum™ AS3X® flybarless system now includes piro-compensation to offer control that’s kinetic in every orientation. Because efficiency is nothing without power, a high-speed outrunner, Castle ESC and 3S Li-Po battery deliver unbelievable authority to both the flybarless head and torque-tube driven tail rotor.

Never ever has a micro-class heli been made so capable. Never ever before has it been this easy to get a high-performance 3D heli.

Optimized Servo Geometry
Optimized servo geometry essentially removes mechanical inefficiency by keeping swashplate links near vertical throughout their range of motion. The outcome is a perfect cyclic and collective response that feels nearly telekinetic.

AS3X® Innovation with Piro-Compensation
The Blade® 180 CFX heli uses Horizon Hobby’s innovative AS3X® flybarless technology that now features innovative piro-compensation for unparalleled efficiency in a helicopter of this size.

Castle Creations ESC
The dependability of a Castle Creations Talon 15 speed control assures great performance for even hard-core 3D flying plus pilots will enjoy the benefit of having motor timing and optimum governor settings pre-programmed.

Rigid Carbon Fiber Frame
The carbon fiber side frames sandwich aluminum bearing and mounting bocks for a structure that is as resilient as it is integral to accuracy control.

Nanolite Receiver
The Spektrum™ AR6335 6-channel receiver features AS3X flybarless technology built-in to deliver high-speed stability and accuracy that’s compatible with your favorite programmable airplane transmitter with Spektrum DSMX® technology.

Nanolite Rotary Servos
The brand new Spektrum rotary servos feature standard rotary movement and digital accuracy with a response speed to satisfy the requiring work of flybarless mechanics.

Brushless Outrunner Motor
The high-torque outrunner motor installed offers pro-level power and a 5800Kv output for aerobatic efficiency that doesn’t drag.

3S Li-Po Power
The included high-output E-flite® 450mAh 3S 11.1V 30C Li-Po battery provides the efficiency hard-core 3D pilots demand.

Torque-Tube Drive Tail
The torque-tube drive tail system features ball-bearing assistance inside an aluminum boom that connects at the tail rotor to a strong one-piece tail case.

Video Introduction






Tech Notes


You will require...
6+ channel DSM2® or DSMX® suitable transmitter
Battery charger for the flight battery






Specs


Main Rotor Size: 14.17 in (360mm)
Tail Rotor Size: 3.56 in (90.5mm)
Gross Weight: 6.70 oz (190 g)
Length: 13.39 in (340mm)
Motor Size: Brushless Out-Runner, 5800Kv
Kit/ARF/RTF: BNF Basic
Rotor Blade Length: Main: 6.06 in (154mm) Tail: 1.26 in (32mm)
Experience Level: Advanced
Recommended Environment: Indoor/Outdoor
Is Assembly Required: No





Media Gallery





 View Image Gallery