Axial Steering Upgrade Kit

This is the Steering Upgrade Kit by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic guiding links
This package will increase guiding strength and precision

INCLUDES:
Plastic linkage set
2 aluminum linkage rods
Installing hardware
In-depth directions

REQUIRES:
Installation on model

Lots of others have actually gotten this thing along with the thing that you are presently checking out.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Tough anodized aluminum building
Compression mount, two screws set up on either side of arm and
    tighten up center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Size: 3mm
Pitch:3x30

The listed below thing likewise sets actually well with the thing being gone over.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while offering improved performance and run times. It uses the same balancing connection as Align or Electrifly chargers. Make certain to utilize a voltage cut off if your speed control does not come equipped with one. ONLY USE A CHARGER SPECIFICALLY FOR Li-Poly cells!!!

This is a great enhancement to the thing presently being gone over.



    This is the Icon 61-90mm Aluminum Shock Set from Axial.

FEATURES:
Compatible with shocks used on the Axial SCX10 chassis
CNC machined pistons, shock bodies and reservoirs for precise fit
Clear layered sleek aluminum bodies with faux oil reservoirs
Polyoxymethylene - (POM/thermoplastic) pistons for smooth action
Titanium nitride coated shafts
Dual rate springs
Steel ball studs, and all assembly hardware
Rebuildable
Completely accredited by Icon Car Dynamics

INCLUDES:
All parts to build two Icon 61-90mm Aluminum Shocks
Instruction Sheet

REQUIRES:
Shock oil of modeler's choice

Regularly gotten with the thing that you are presently checking out.



This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Prepared to Run SCX10 Deadbolt Rock Spider Truck from Axial.

**Added Technical Information Will Be Included When It Becomes Available.**

FUNCTIONS:
Chassis: Scale steel C-channel with cross bracing for reinforcement
    and put together with hex hardware
Drive: 4 wheel shaft with WB8 swine driveshafts and continuous
    speed joint design
Diff Locker: One-piece sintered metal building minimizes slop in
    drive train by eliminating cross pin
Radio: AX-3 2-channel 2.4GHz with high torque 151 oz/in metal equipment
    Strategy TSX45 servo
ESC: AE-5 LiPo suitable with forward, reverse and drag brake
    function, waterproof and 3S LiPo suitable
Motor: 27T brushed motor
Pinion Equipment: 32 pitch
Shocks: Oil filled single rate with sensible looking non-functional
    coilover shock tank, plastic body
Transmission: Created to place motor weight as low as possible
    to maintain a low CG, adjustable ratio from 15:1 - 74:1, double
    slipper clutch with 32 pitch tailoring for high torque applications
    permits transmission to slip in tough binds
Body: Deadbolt style with painted hood cowl, interior, scale helmet,
    decals and fuel cell
Wheels: 1.9" broad Walker Evans, nylon building, black in
    color, 12mm hex
Tires: Maxxis Trepador R35 sticky compound 1.43" (36mm) broad, 4.6"
    (117mm) diameter
Rear Suspension: 4-link optimized to reduce axle guide and torque
    twist
Front Bumper: Formally licensed Poison Spyder Rock Brawler with
    functional D Rings, and installing holes for LED lights (lights not
    suched as)

INCLUDES:
RTR SCX10 Deadbolt, 2-ch 2.4GHz radio, ESC, 27T Motor,
    Instruction Manual

REQUIRES:
Transmitter Batteries: Four AA size
Battery: 7.2V NiMH 6-cell stick pack or 2-3S LiPo pack
Battery Battery charger: Compatible with chosen battery
Track devices

SPECIFICATIONS:
Car-
Length: 18.1" (460mm)
Width: 8.8" (225mm)
Height: 9" (229mm)
Wheepoundase: 12" (305mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.65lb (2.1kg)
    Body-
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 5x11mm Fr Dogbones 1 DTXC1547
2 10x15mm Fr Dogbones 1 DTXC1595
2 5x11mm Front Axle 1 DTXC1547
2 5x11mm Fr Hubs 1 DTXC1547
2 10x15mm Fr Hubs 1 DTXC1595
2 5x11mm Rear Dogbones 1 DTXC1547
2 10x15mm Rear Dogbones 1 DTXC1595
2 5x11mm Rear Axle 1 DTXC1547
4 5x10mm Transmission 1 DTXC1535
2 8x16mm Transmission 1 DTXC1585