Axial SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Red

Key Functions:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with sensible light bar
• Reasonable driver figure and many other scale details
• Formally certified KMC XD229 Machete Crawl wheels
• Formally certified Nitto Trail Grappler M/T tires (S30 compound, large block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts enable maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones provide strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything stiff and lined up
• Front and rear axles consist of a two-piece, molded plastic solid axle style
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated reservoir and long lasting plastic suspension links deliver tested Axial crawling performance
• Front and rear differentials each home a worm gear setup to power the axles and produce greater ground clearance. Worm gear drive also offers a low gear ratio to decrease torque twist
• 2 LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to bring on your hiking, camping, and other outdoor and indoor adventures — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even new modelers driving the SCX24 chassis will be fully equipped to deal with hard climbs up and rough trails. Like the bigger SCX10™ chassis, this smaller variation utilizes lots of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert surface, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis includes a three-link front and four-link rear suspension. The combination of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling performance even at this little scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that lowers torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts skills and charm on the trails. Take a look at that Deadbolt body — with its narrow stance, bulging hood, sensible driver figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires.

Adding a lot more to its novice appeal, the SCX24 Deadbolt comes 100% complete and all set to run. Whatever required for action is in package: assembled and completed vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electrical motor and 350mAh TWO 7.4V LiPo battery; USB LiPo charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combination (installed)
    (1) Dynamite® 88T brushed electrical motor (installed)
    (1) Axial AS-1 steering servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh TWO 7.4V LiPo battery
(1) USB LiPo charger
(1) Product Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis functions rugged and strong steel c-channel frame rails with bracing to keep everything intact and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the right amount of torque to assist ascend steep climbs up. It's mated to a steel motor mount to keep flex to a minimum, which helps safeguard the equipments.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm gear setup to get the power to the axles and produce greater ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones provide strength and sturdiness to keep things running during hard climbs up and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the combination of coilover shocks with simulated tanks and long lasting plastic suspension links provides the crawling performance you've understood and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a 2 piece, formed plastic solid axle style. For optimal handling, the SCX24™ suspension includes a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
2 brilliant LED lights are consisted of and are installed in the front bumper. An additional LED light port on the ESC allows you to include optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link style for the rear which is enhanced to decrease axle steer and torque twist. We've also consisted of extra suspension links for adjusting your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally certified KMC XD Machete wheels are legendary in the off-road world. They are formed in black and feature stunning scale details, despite the little scale.
The formally licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still maintaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board components. You can quickly reach the battery and chassis by eliminating just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn't indicate the functions need to follow suit. No bushings discovered here, rather the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo equipments in case of a bind or effect.
 

Specs

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheelbase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Trail Grappler M/T, large block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No