Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Info Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper installs with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    mounted servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ design front driveshafts for up to 45° of guiding
    angle, complete ball bearing drivetrain
Transmission: AX10 3 gear design, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Dual pad design for included area, 32P gear
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Technique TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point modification & reverse, pushbutton
    guiding and throttle trim
Steering Servo: Technique TSX45 metal gear, water resistant, 151oz/in
    (10.87kg/cm) torque rating, double ball bearings
ESC: AE-5L waterproof, switchable in between LiPo or NiMH
    operation with a simple jumper, Star plug battery port,
    integrated LED light controller (KEEP IN MIND LED leads are not compatible
    with old Axial LED light strings, or third party LED light strings)
Stimulate Equipment: 56T 32-pitch, plastic building
Pinion Equipment 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    2 red lights for tail lights
Battery Tray: Easy gain access to front install, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position dimensions are decreased to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Solidified steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear
    ratio for decreased torque twist, optional gearing choices, one-
    piece axle housing, increased clearance, bigger load ranked
    bearings for toughness, 8° kingpin axle eliminates tire scrub,
    single piece axle housing, one-piece all metal locker, 10°
    increment changes for knuckle carriers and straight axle
    adapters, optimized gear ratio; 3.75 compared to 2.92 formerly,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Approach Hole, 1.02" (26mm) large, 2.12" (53.9mm) tall,
    12mm hex, matte black surface
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Surface
    tread with amazing traction on numerous surfaces, 4.7" (119.4mm) tall,
    1.5" (38.1mm) large
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated installs
    upper and lower links, 4-link design lowers axle steer
    and torque twist, and defend against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry utilizing 3-link setup with panhard bar,
    45° guiding angle
Guarantee: One year bumper to bumper restricted. Axial's warranty center
    Pastime Services will repair or change any incorrectly made part.
    Evidence of purchase is needed for Axial to honor any warranty
    claim. Axial reserves the right to change or customize this warranty
    without notice. This warranty does not cover damages due to typical
    wear and tear, users' failure to carry out regular maintenance, user
    mistake of assembly or installation, adjustments, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Buying items from unapproved merchants might void the
    warranty and prevent support and service.
    Repair or replacement of the item by Pastime Services is the sole
    and special solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with selected battery
Structure and track equipment

SPECIFICATIONS:
Car-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link kits offered independently
Ground Clearance: 3.0" (77mm)
Weight: 4.5pounds (2.04kg) around, with electronic devices
Optimized Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion gear combinations, extra
spur and pinion gears need to be bought independently)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535