Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Extra Technical Info Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body mount,
    adjustable bumper mounts with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ style front driveshafts for up to 45° of guiding
    angle, full ball bearing drivetrain
Transmission: AX10 3 gear design, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Double pad design for added area, 32P gear
    pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
    fan
Radio: Method TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point modification & reverse, pushbutton
    guiding and throttle trim
Guiding Servo: Method TSX45 metal gear, water resistant, 151oz/in
    (10.87kg/cm) torque score, dual ball bearings
ESC: AE-5L water resistant, switchable between LiPo or NiMH
    operation with an easy jumper, Star plug battery port,
    integrated LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or 3rd party LED light strings)
Stimulate Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy gain access to front mount, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
    position measurements are lowered to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, optimized gear
    ratio for lowered torque twist, optional tailoring options, one-
    piece axle real estate, increased clearance, larger load rated
    bearings for durability, 8° kingpin axle gets rid of tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment modifications for knuckle carriers and straight axle
    adapters, optimized gear ratio; 3.75 compared to 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) wide, 2.12" (53.9mm) high,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Terrain
    tread with remarkable traction on many surface areas, 4.7" (119.4mm) high,
    1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated mounts
    upper and lower links, 4-link design reduces axle guide
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry utilizing 3-link setup with panhard bar,
    45° guiding angle
Service warranty: One year bumper to bumper limited. Axial's service warranty center
    Hobby Services will fix or replace any incorrectly made part.
    Evidence of purchase is needed for Axial to honor any service warranty
    claim. Axial reserves the right to change or customize this service warranty
    without notice. This service warranty does not cover damages due to regular
    wear and tear, users' failure to perform routine maintenance, user
    error of assembly or setup, modifications, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Getting items from unauthorized merchants may void the
    service warranty and avoid support and service.
    Repair work or replacement of the item by Hobby Services is the sole
    and unique solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Suitable with chosen battery
Structure and track equipment

SPECIFICATIONS:
Lorry-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link kits sold separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5pounds (2.04kg) roughly, with electronics
Optimized Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion gear combinations, extra
spur and pinion equipments need to be bought separately)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535