Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Information Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
All Set to Run SCX10 II Trail Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper mounts with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
    driveshafts, UVJ design front driveshafts for up to 45° of guiding
    angle, full ball bearing drivetrain
Transmission: AX10 3 equipment layout, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Dual pad style for added surface area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
    fan
Radio: Technique TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Steering Servo: Technique TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque rating, double ball bearings
ESC: AE-5L waterproof, switchable between LiPo or NiMH
    operation with a basic jumper, Star plug battery adapter,
    integrated LED light controller (KEEP IN MIND LED leads are not suitable
    with old Axial LED light strings, or 3rd party LED light strings)
Spur Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: 4 white for head lights and turn signal markers, and
    2 red lights for tail lights
Battery Tray: Easy access front install, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position measurements are minimized to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized equipment
    ratio for minimized torque twist, optional gearing choices, one-
    piece axle real estate, increased clearance, larger load ranked
    bearings for resilience, 8° kingpin axle removes tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment changes for knuckle carriers and straight axle
    adapters, optimized equipment ratio; 3.75 compared to 2.92 formerly,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Approach Hole, 1.02" (26mm) broad, 2.12" (53.9mm) high,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Surface
    tread with amazing traction on lots of surface areas, 4.7" (119.4mm) high,
    1.5" (38.1mm) broad
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Enhanced suspension geometry with integrated mounts
    upper and lower links, 4-link style decreases axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Correct CMS geometry utilizing 3-link setup with panhard bar,
    45° guiding angle
Service warranty: One year bumper to bumper minimal. Axial's service warranty center
    Hobby Solutions will repair or replace any improperly made part.
    Proof of purchase is needed for Axial to honor any service warranty
    claim. Axial reserves the right to change or modify this service warranty
    without notification. This service warranty does not cover damages due to typical
    wear and tear, users' failure to carry out routine maintenance, user
    mistake of assembly or setup, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Purchasing products from unapproved sellers may void the
    service warranty and avoid assistance and service.
    Repair work or replacement of the item by Hobby Solutions is the sole
    and special remedy for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with chosen battery
Structure and track devices

SPECS:
Lorry-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link sets sold independently
Ground Clearance: 3.0" (77mm)
Weight: 4.5pounds (2.04kg) around, with electronic devices
Enhanced Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion equipment mixes, additional
spur and pinion gears must be acquired independently)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535