Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Details Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper installs with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    mounted servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Wild Boar
    driveshafts, UVJ style front driveshafts for up to 45° of steering
    angle, complete ball bearing drivetrain
Transmission: AX10 three equipment design, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Dual pad design for included surface area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Tactic TTX200 2-channel SLT radio with TR325 Receiver,
    steering and throttle end point adjustment & reverse, pushbutton
    steering and throttle trim
Guiding Servo: Tactic TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque rating, dual ball bearings
ESC: AE-5L waterproof, switchable between LiPo or NiMH
    operation with an easy jumper, Star plug battery port,
    integrated LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or third party LED light strings)
Spur Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    2 traffic signals for tail lights
Battery Tray: Easy access front install, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position dimensions are decreased to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, optimized equipment
    ratio for decreased torque twist, optional tailoring options, one-
    piece axle real estate, increased clearance, larger load ranked
    bearings for resilience, 8° kingpin axle eliminates tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment adjustments for knuckle providers and straight axle
    adapters, optimized equipment ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Technique Hole, 1.02" (26mm) wide, 2.12" (53.9mm) high,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Terrain
    tread with remarkable traction on lots of surface areas, 4.7" (119.4mm) high,
    1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Enhanced suspension geometry with incorporated installs
    upper and lower links, 4-link design minimizes axle steer
    and torque twist, and defend against suspension wrap-up in high-
    power applications, composite links
Steering: Correct CMS geometry utilizing 3-link setup with panhard bar,
    45° steering angle
Warranty: One year bumper to bumper minimal. Axial's warranty center
    Pastime Solutions will fix or replace any improperly made part.
    Evidence of purchase is needed for Axial to honor any warranty
    claim. Axial reserves the right to change or modify this warranty
    without notification. This warranty does not cover damages due to normal
    wear and tear, users' failure to perform regular upkeep, user
    mistake of assembly or installation, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Acquiring items from unauthorized sellers may void the
    warranty and prevent assistance and service.
    Repair or replacement of the item by Pastime Solutions is the sole
    and special treatment for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and Instruction Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Suitable with selected battery
Structure and track equipment

SPECIFICATIONS:
Lorry-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages offered separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) around, with electronic devices
Enhanced Gear Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion equipment mixes, extra
spur and pinion equipments must be purchased separately)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535