Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Information Will Be Included When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Path Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body mount,
    adjustable bumper installs with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ design front driveshafts for up to 45° of steering
    angle, full ball bearing drivetrain
Transmission: AX10 three equipment layout, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Dual pad design for added area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Strategy TTX200 2-channel SLT radio with TR325 Receiver,
    steering and throttle end point adjustment & reverse, pushbutton
    steering and throttle trim
Guiding Servo: Strategy TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque score, double ball bearings
ESC: AE-5L water resistant, switchable between LiPo or NiMH
    operation with an easy jumper, Star plug battery adapter,
    built-in LED light controller (KEEP IN MIND LED leads are not suitable
    with old Axial LED light strings, or third party LED light strings)
Spur Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    2 red lights for tail lights
Battery Tray: Easy access front mount, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position dimensions are minimized to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, enhanced equipment
    ratio for minimized torque twist, optional gearing choices, one-
    piece axle housing, increased clearance, bigger load ranked
    bearings for resilience, 8° kingpin axle removes tire scrub,
    single piece axle housing, one-piece all metal locker, 10°
    increment modifications for knuckle carriers and straight axle
    adapters, enhanced equipment ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Path Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Technique Hole, 1.02" (26mm) broad, 2.12" (53.9mm) tall,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Terrain
    tread with amazing traction on numerous surface areas, 4.7" (119.4mm) tall,
    1.5" (38.1mm) broad
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with incorporated installs
    upper and lower links, 4-link design decreases axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Proper CMS geometry using 3-link setup with panhard bar,
    45° steering angle
Service warranty: One year bumper to bumper limited. Axial's warranty center
    Pastime Services will fix or change any improperly made part.
    Evidence of purchase is required for Axial to honor any warranty
    claim. Axial reserves the right to change or customize this warranty
    without notice. This warranty does not cover damages due to normal
    wear and tear, users' failure to perform regular upkeep, user
    mistake of assembly or installation, adjustments, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Getting items from unapproved merchants might void the
    warranty and prevent support and service.
    Repair work or replacement of the item by Pastime Services is the sole
    and special remedy for any loss or damages.

INCLUDES:
RTR SCX10 II Path Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Compatible with picked battery
Building and track devices

SPECIFICATIONS:
Vehicle-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages sold separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) roughly, with electronics
Optimized Gear Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion equipment combinations, additional
spur and pinion equipments should be purchased separately)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Top Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535