Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Extra Technical Information Will Be Included When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Path Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper mounts with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
    driveshafts, UVJ style front driveshafts for up to 45° of guiding
    angle, full ball bearing drivetrain
Transmission: AX10 three gear layout, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Double pad style for added area, 32P gear
    pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
    fan
Radio: Method TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Guiding Servo: Method TSX45 metal gear, water resistant, 151oz/in
    (10.87kg/cm) torque score, dual ball bearings
ESC: AE-5L water resistant, switchable between LiPo or NiMH
    operation with a basic jumper, Star plug battery connector,
    built-in LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or 3rd party LED light strings)
Spur Equipment: 56T 32-pitch, plastic construction
Pinion Equipment 15T 32-pitch, steel construction
LED Lights: 4 white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy access front install, accomodates batteries as much as
    5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
    position measurements are decreased to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, enhanced gear
    ratio for decreased torque twist, optional tailoring options, one-
    piece axle real estate, increased clearance, bigger load ranked
    bearings for sturdiness, 8° kingpin axle eliminates tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment adjustments for knuckle providers and straight axle
    adapters, enhanced gear ratio; 3.75 compared to 2.92 formerly,
    for less torque twist
Body: Painted Path Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Technique Hole, 1.02" (26mm) wide, 2.12" (53.9mm) tall,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Terrain
    tread with remarkable traction on many surface areas, 4.7" (119.4mm) tall,
    1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Enhanced suspension geometry with integrated mounts
    upper and lower links, 4-link style minimizes axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Correct CMS geometry using 3-link setup with panhard bar,
    45° guiding angle
Warranty: One year bumper to bumper restricted. Axial's guarantee center
    Pastime Solutions will repair or replace any improperly made part.
    Proof of purchase is needed for Axial to honor any guarantee
    claim. Axial reserves the right to change or modify this guarantee
    without notification. This guarantee does not cover damages due to regular
    wear and tear, users' failure to perform regular maintenance, user
    error of assembly or setup, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Acquiring items from unauthorized sellers may void the
    guarantee and avoid support and service.
    Repair or replacement of the item by Pastime Solutions is the sole
    and special solution for any loss or damages.

INCLUDES:
RTR SCX10 II Path Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and Instruction Manual

NEEDS:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Suitable with chosen battery
Structure and track equipment

SPECS:
Automobile-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link sets sold individually
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) around, with electronic devices
Enhanced Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion gear mixes, extra
spur and pinion equipments must be purchased individually)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535