Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Details Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Path Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper installs with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Wild Boar
    driveshafts, UVJ design front driveshafts for up to 45° of guiding
    angle, complete ball bearing drivetrain
Transmission: AX10 3 gear layout, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Double pad style for added area, 32P gear
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Technique TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point modification & reverse, pushbutton
    guiding and throttle trim
Guiding Servo: Technique TSX45 metal gear, water resistant, 151oz/in
    (10.87kg/cm) torque ranking, dual ball bearings
ESC: AE-5L waterproof, switchable between LiPo or NiMH
    operation with an easy jumper, Star plug battery port,
    integrated LED light controller (NOTE LED leads are not suitable
    with old Axial LED light strings, or 3rd party LED light strings)
Stimulate Equipment: 56T 32-pitch, plastic building
Pinion Equipment 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy access front install, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position measurements are reduced to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear
    ratio for reduced torque twist, optional gearing choices, one-
    piece axle real estate, increased clearance, larger load rated
    bearings for toughness, 8° kingpin axle gets rid of tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment adjustments for knuckle providers and straight axle
    adapters, optimized gear ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Path Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Technique Hole, 1.02" (26mm) large, 2.12" (53.9mm) tall,
    12mm hex, matte black surface
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Terrain
    tread with incredible traction on many surfaces, 4.7" (119.4mm) tall,
    1.5" (38.1mm) large
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with incorporated installs
    upper and lower links, 4-link style decreases axle guide
    and torque twist, and defend against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry using 3-link setup with panhard bar,
    45° guiding angle
Service warranty: One year bumper to bumper minimal. Axial's service warranty center
    Pastime Services will fix or replace any improperly made part.
    Evidence of purchase is required for Axial to honor any service warranty
    claim. Axial reserves the right to change or modify this service warranty
    without notice. This service warranty does not cover damages due to regular
    wear and tear, users' failure to perform routine upkeep, user
    mistake of assembly or installation, modifications, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Getting items from unapproved sellers may void the
    service warranty and prevent support and service.
    Repair or replacement of the product by Pastime Services is the sole
    and exclusive remedy for any loss or damages.

INCLUDES:
RTR SCX10 II Path Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Compatible with selected battery
Structure and track devices

SPECS:
Vehicle-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages sold separately
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) approximately, with electronics
Optimized Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion gear combinations, extra
spur and pinion gears should be purchased separately)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion gear 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Top Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535