Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Information Will Be Added When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
All Set to Run SCX10 II Trail Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper mounts with swaybar mounting points, mounting
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ style front driveshafts for up to 45° of steering
    angle, complete ball bearing drivetrain
Transmission: AX10 three equipment design, metal motor plate, adjustable
    ratio for high speed or competition level crawling speed
Slipper Clutch: Dual pad design for added area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush equipped, water resistant, integrated cooling
    fan
Radio: Tactic TTX200 2-channel SLT radio with TR325 Receiver,
    steering and throttle end point change & reverse, pushbutton
    steering and throttle trim
Steering Servo: Tactic TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque score, dual ball bearings
ESC: AE-5L water resistant, switchable between LiPo or NiMH
    operation with a simple jumper, Star plug battery connector,
    integrated LED light controller (KEEP IN MIND LED leads are not suitable
    with old Axial LED light strings, or 3rd party LED light strings)
Stimulate Gear: 56T 32-pitch, plastic building
Pinion Gear 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy access front install, accomodates batteries as much as
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position measurements are reduced to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Solidified steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, enhanced equipment
    ratio for reduced torque twist, optional gearing choices, one-
    piece axle real estate, increased clearance, larger load ranked
    bearings for sturdiness, 8° kingpin axle gets rid of tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment modifications for knuckle providers and straight axle
    adapters, enhanced equipment ratio; 3.75 compared to 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) broad, 2.12" (53.9mm) high,
    12mm hex, matte black surface
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Terrain
    tread with remarkable traction on numerous surface areas, 4.7" (119.4mm) high,
    1.5" (38.1mm) broad
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Enhanced suspension geometry with integrated mounts
    upper and lower links, 4-link design reduces axle guide
    and torque twist, and defend against suspension wrap-up in high-
    power applications, composite links
Steering: Correct CMS geometry using 3-link setup with panhard bar,
    45° steering angle
Warranty: One year bumper to bumper restricted. Axial's guarantee center
    Pastime Services will repair or replace any incorrectly made part.
    Proof of purchase is needed for Axial to honor any guarantee
    claim. Axial reserves the right to change or customize this guarantee
    without notice. This guarantee does not cover damages due to typical
    wear and tear, users' failure to carry out routine upkeep, user
    error of assembly or setup, modifications, abuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Note: Purchasing products from unapproved merchants might void the
    guarantee and prevent support and service.
    Repair or replacement of the product by Pastime Services is the sole
    and special remedy for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Suitable with picked battery
Structure and track equipment

SPECS:
Automobile-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages offered individually
Ground Clearance: 3.0" (77mm)
Weight: 4.5pounds (2.04kg) roughly, with electronics
Enhanced Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion equipment combinations, additional
spur and pinion equipments must be acquired individually)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Qty. Stock Number
2 7x14mm Ring Gear 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Gear 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Top Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535