Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Extra Technical Information Will Be Included When It Becomes Available,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Ready to Run SCX10 II Path Honcho 4WD.

FUNCTIONS:
Chassis: Scale steel C-channel side rails with adjustable body mount,
    adjustable bumper installs with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full-time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ design front driveshafts for up to 45° of steering
    angle, full ball bearing drivetrain
Transmission: AX10 3 equipment design, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Double pad style for added area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Technique TTX200 2-channel SLT radio with TR325 Receiver,
    steering and throttle end point modification & reverse, pushbutton
    steering and throttle trim
Guiding Servo: Technique TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque ranking, dual ball bearings
ESC: AE-5L water resistant, switchable in between LiPo or NiMH
    operation with an easy jumper, Star plug battery adapter,
    integrated LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or third party LED light strings)
Stimulate Equipment: 56T 32-pitch, plastic building
Pinion Equipment 15T 32-pitch, steel building
LED Lights: Four white for head lights and turn signal markers, and
    two red lights for tail lights
Battery Tray: Easy access front mount, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) 3S, 5000mAh, with battery posts in
    position dimensions are reduced to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Solidified steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal equipments, optimized equipment
    ratio for reduced torque twist, optional tailoring choices, one-
    piece axle real estate, increased clearance, bigger load rated
    bearings for resilience, 8° kingpin axle gets rid of tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment adjustments for knuckle carriers and straight axle
    adapters, optimized equipment ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Path Honcho
Front Bumper: Scale tube style with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) wide, 2.12" (53.9mm) tall,
    12mm hex, matte black finish
Tires: 1.9" Falken Wildpeak M/T, aggressively treaded Mud Surface
    tread with amazing traction on numerous surfaces, 4.7" (119.4mm) tall,
    1.5" (38.1mm) wide
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with incorporated installs
    upper and lower links, 4-link style lowers axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry utilizing 3-link setup with panhard bar,
    45° steering angle
Warranty: One year bumper to bumper limited. Axial's service warranty center
    Pastime Providers will repair or replace any improperly made part.
    Proof of purchase is needed for Axial to honor any service warranty
    claim. Axial reserves the right to alter or customize this service warranty
    without notification. This service warranty does not cover damages due to typical
    wear and tear, users' failure to carry out routine maintenance, user
    mistake of assembly or setup, modifications, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Acquiring items from unapproved sellers might void the
    service warranty and prevent assistance and service.
    Repair or replacement of the item by Pastime Providers is the sole
    and special solution for any loss or damages.

INCLUDES:
RTR SCX10 II Path Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and User's Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with selected battery
Structure and track equipment

SPECS:
Lorry-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link sets sold individually
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) approximately, with electronic devices
Optimized Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with various spur/pinion equipment combinations, additional
spur and pinion equipments need to be acquired individually)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535