Axial SCX10 II Trail Honcho 1/10th Electric 4WD RTR

**Additional Technical Info Will Be Added When It Appears,**
This is the Electric Powered, Radio Controlled, 1/10 scale
Prepared to Run SCX10 II Trail Honcho 4WD.

FEATURES:
Chassis: Scale steel C-channel side rails with adjustable body install,
    adjustable bumper mounts with swaybar installing points, installing
    points for optional 2-speed and servo winch, adjustable chassis
    installed servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Swine
    driveshafts, UVJ style front driveshafts for up to 45° of guiding
    angle, full ball bearing drivetrain
Transmission: AX10 3 equipment layout, metal motor plate, adjustable
    ratio for high speed or competitors level crawling speed
Slipper Clutch: Double pad design for included surface area, 32P equipment
    pitch for high-torque applications
Motor: 35 turn, brush geared up, water resistant, integrated cooling
    fan
Radio: Method TTX200 2-channel SLT radio with TR325 Receiver,
    guiding and throttle end point adjustment & reverse, pushbutton
    guiding and throttle trim
Steering Servo: Method TSX45 metal equipment, water resistant, 151oz/in
    (10.87kg/cm) torque score, double ball bearings
ESC: AE-5L waterproof, switchable in between LiPo or NiMH
    operation with a simple jumper, Star plug battery port,
    built-in LED light controller (NOTE LED leads are not compatible
    with old Axial LED light strings, or third party LED light strings)
Spur Equipment: 56T 32-pitch, plastic construction
Pinion Equipment 15T 32-pitch, steel construction
LED Lights: 4 white for head lights and turn signal markers, and
    2 traffic signals for tail lights
Battery Tray: Easy gain access to front install, accomodates batteries up to
    5.75 x 1.2" (147 x 32mm) THREE, 5000mAh, with battery posts in
    position dimensions are lowered to 5.4 x .94" (138 x 24mm)
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized equipment
    ratio for lowered torque twist, optional tailoring options, one-
    piece axle real estate, increased clearance, larger load rated
    bearings for durability, 8° kingpin axle gets rid of tire scrub,
    single piece axle real estate, one-piece all metal locker, 10°
    increment modifications for knuckle carriers and straight axle
    adapters, optimized equipment ratio; 3.75 compared with 2.92 previously,
    for less torque twist
Body: Painted Trail Honcho
Front Bumper: Scale tube design with aluminum skid plates
Wheels: 1.9" Method Hole, 1.02" (26mm) large, 2.12" (53.9mm) tall,
    12mm hex, matte black surface
Tires: 1.9" Falken Wildpeak M/T, strongly treaded Mud Surface
    tread with fantastic traction on lots of surface areas, 4.7" (119.4mm) tall,
    1.5" (38.1mm) large
Shocks: Coil over, oil filled, steel springs, white in color
Suspension: Optimized suspension geometry with integrated mounts
    upper and lower links, 4-link design minimizes axle steer
    and torque twist, and guards against suspension wrap-up in high-
    power applications, composite links
Steering: Appropriate CMS geometry utilizing 3-link setup with panhard bar,
    45° guiding angle
Service warranty: One year bumper to bumper limited. Axial's service warranty center
    Hobby Services will repair or replace any improperly made part.
    Evidence of purchase is required for Axial to honor any service warranty
    claim. Axial reserves the right to alter or customize this service warranty
    without notification. This service warranty does not cover damages due to regular
    wear and tear, users' failure to carry out routine upkeep, user
    mistake of assembly or setup, adjustments, misuse, crash
    damage, or the addition of aftermarket parts or optional parts.
    Keep in mind: Acquiring products from unauthorized retailers may void the
    service warranty and avoid assistance and service.
    Repair or replacement of the product by Hobby Services is the sole
    and unique solution for any loss or damages.

INCLUDES:
RTR SCX10 II Trail Honcho with Oil-Filled Shocks, Wheels, Tires,
    Body, Rock Sliders, Radio, ESC, Motor, Decals, Waterproof
    Receiver Box, LED Lights 4 AA Batteries and Instruction Manual

REQUIRES:
Battery: 6-cell NiMH or 2-3S LiPo
Battery Battery Charger: Compatible with picked battery
Structure and track equipment

SPECIFICATIONS:
Automobile-
Length: 19.25" (489mm)
Width: 8.9" (226mm)
Height: 9.4" (223.4mm)
Stock Wheelbase: 12.3" (312.4mm), adjustable to 11.4" (289mm) or
    12.0" (305mm) with optional link packages sold individually
Ground Clearance: 3.0" (77mm)
Weight: 4.5lbs (2.04kg) around, with electronic devices
Optimized Equipment Ratio: 3.75:1
Last Drive Ratio (FDR): 40.44, stock
    (33.69-54.15 with different spur/pinion equipment mixes, additional
spur and pinion gears need to be bought individually)
    Body-
Length: 17.2" (438mm)
Width: 8" (203mm)
Height: 5.5" (140mm)

COMMENTS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Qty. Stock Number
2 7x14mm Ring Equipment 1 AXIC4406
2 5x14mm Pinion equipment 1 AXIC4407
2 5x11mm Pinion Equipment 1 DTXC1547
2 10x15mm Front Uprights 1 DTXC1595
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Back Axles 1 DTXC1547
2 5x11mm 2-sp Leading Shaft 1 DTXC1547
2 5x11mm 2-sp Bottom Shaft 1 DTXC1547
4 5x10mm Transfer Case 1 DTXC1535