Axial O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

CONSISTS OF:
10 O-Rings

SPECS:
Outer Diameter: 5.5mm (0.22")
Inner Diameter: 2.5mm (0.10")
Density: 1.5mm (0.06")

This is a fantastic enhancement to the thing currently being gone over.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

The listed below thing likewise sets actually well with the thing being gone over.

Diff Gasket 16x25x0.5mm

    This is a set of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building and construction, grey in color
Changes worn or broken differential gaskets

CONSISTS OF:
2 Differential Gaskets

REQUIRES:
Setup following the design handbook

SPECS:
Outdoors Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Density: .020" (.52mm)

Several others have actually acquired this thing along with the thing that you are currently reading about.

O-Ring 5x1mm (10)

These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

CONSISTS OF:
10 O-Rings

SPECS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Density: 1mm (0.039")

Here is one more thing that praises the thing being gone over.

Axle 5x35mm

This is a set of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building and construction, black in color
Changes worn or broken axles
Works on the front or back of the design

CONSISTS OF:
2 Axles

REQUIRES:
Setup following the design handbook

SPECS:
Length: 1.37" (35mm)
Shaft Diameter: .20" (5mm) 4mm threaded

This thing praises the above gone over thing.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
10 nylon locking hex nuts

REQUIRES:
Setup on the Scorpion

SPECS:
Density: 4mm
External diameter: 6mm
Inner diameter: 2mm

Here is one more thing that praises the thing being gone over.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Setup on vehicle

COMMENTS:
Can be used anywhere this size screw is needed