Axial O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

INCLUDES:
Ten O-Rings

SPECS:
Outer Diameter: 5.5mm (0.22")
Inner Diameter: 2.5mm (0.10")
Density: 1.5mm (0.06")

This is a great enhancement to the product currently being reviewed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

The below product additionally sets truly well with the product being reviewed.

Diff Gasket 16x25x0.5mm

    This is a set of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building, grey in color
Changes used or broken differential gaskets

INCLUDES:
Two Differential Gaskets

NEEDS:
Setup following the design handbook

SPECS:
Outdoors Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Density: .020" (.52mm)

Several others have actually bought this product in addition to the product that you are currently reviewing.

O-Ring 5x1mm (10)

These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

INCLUDES:
Ten O-Rings

SPECS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Density: 1mm (0.039")

Below is an additional product that praises the product being reviewed.

Axle 5x35mm

This is a set of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building, black in color
Changes used or broken axles
Works on the front or rear of the design

INCLUDES:
Two Axles

NEEDS:
Setup following the design handbook

SPECS:
Length: 1.37" (35mm)
Shaft Diameter: .20" (5mm) 4mm threaded

This product praises the above reviewed product.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

INCLUDES:
Ten nylon locking hex nuts

NEEDS:
Setup on the Scorpion

SPECS:
Density: 4mm
Outer size: 6mm
Inner size: 2mm

Below is an additional product that praises the product being reviewed.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building

INCLUDES:
Ten M3 x 10mm screws

NEEDS:
Setup on automobile

COMMENTS:
Can be utilized anywhere this size screw is required