Axial O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

INCLUDES:
10 O-Rings

SPECIFICATIONS:
Outer Diameter: 5.5mm (0.22")
Inner Diameter: 2.5mm (0.10")
Thickness: 1.5mm (0.06")

This is a amazing enhancement to the product presently being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Primary Clutch (one required).

The below product likewise pairs truly well with the product being talked about.

Diff Gasket 16x25x0.5mm

    This is a set of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building and construction, grey in color
Changes worn or broken differential gaskets

INCLUDES:
Two Differential Gaskets

NEEDS:
Installation following the model handbook

SPECIFICATIONS:
Outside Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Thickness: .020" (.52mm)

Numerous others have purchased this product along with the product that you are presently reviewing.

O-Ring 5x1mm (10)

These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

INCLUDES:
10 O-Rings

SPECIFICATIONS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Thickness: 1mm (0.039")

Right here is another product that praises the product being talked about.

Axle 5x35mm

This is a set of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building and construction, black in color
Changes worn or broken axles
Works on the front or rear of the model

INCLUDES:
Two Axles

NEEDS:
Installation following the model handbook

SPECIFICATIONS:
Length: 1.37" (35mm)
Shaft Diameter: .20" (5mm) 4mm threaded

This product praises the above talked about product.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

INCLUDES:
10 nylon locking hex nuts

NEEDS:
Installation on the Scorpion

SPECIFICATIONS:
Thickness: 4mm
Outer diameter: 6mm
Inner diameter: 2mm

Right here is another product that praises the product being talked about.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

INCLUDES:
10 M3 x 10mm screws

NEEDS:
Installation on vehicle

COMMENTS:
Can be utilized wherever this size screw is required