Axial O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

CONSISTS OF:
10 O-Rings

SPECIFICATIONS:
Outer Size: 5.5mm (0.22")
Inner Size: 2.5mm (0.10")
Density: 1.5mm (0.06")

This is a amazing addition to the thing presently being discussed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one required).

The below thing additionally sets actually well with the thing being discussed.

Diff Gasket 16x25x0.5mm

    This is a pair of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building, grey in color
Replaces used or damaged differential gaskets

CONSISTS OF:
2 Differential Gaskets

REQUIRES:
Installation following the design manual

SPECIFICATIONS:
Outside Size: 1" (25mm)
Inside Size: .67" (17mm)
Density: .020" (.52mm)

Several others have actually bought this thing in addition to the thing that you are presently reading about.

O-Ring 5x1mm (10)

These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

CONSISTS OF:
10 O-Rings

SPECIFICATIONS:
Outer Size: 6.5mm (0.25")
Inner Size: 5mm (0.196")
Density: 1mm (0.039")

Here is another thing that compliments the thing being discussed.

Axle 5x35mm

This is a pair of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building, black in color
Replaces used or damaged axles
Functions on the front or rear of the design

CONSISTS OF:
2 Axles

REQUIRES:
Installation following the design manual

SPECIFICATIONS:
Length: 1.37" (35mm)
Shaft Size: .20" (5mm) 4mm threaded

This thing compliments the above discussed thing.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
10 nylon locking hex nuts

REQUIRES:
Installation on the Scorpion

SPECIFICATIONS:
Density: 4mm
External size: 6mm
Inner size: 2mm

Here is another thing that compliments the thing being discussed.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Installation on car

COMMENTS:
Can be used any place this size screw is required