Axial O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

INCLUDES:
Ten O-Rings

SPECIFICATIONS:
Outer Diameter: 5.5mm (0.22")
Inner Diameter: 2.5mm (0.10")
Thickness: 1.5mm (0.06")

This is a amazing enhancement to the thing presently being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

The listed below thing likewise pairs truly well with the thing being talked about.



    This is a pair of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building and construction, grey in color
Changes worn or damaged differential gaskets

INCLUDES:
Two Differential Gaskets

NEEDS:
Setup following the design handbook

SPECIFICATIONS:
Outdoors Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Thickness: .020" (.52mm)

Several others have gotten this thing in addition to the thing that you are presently checking out.



These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

INCLUDES:
Ten O-Rings

SPECIFICATIONS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Thickness: 1mm (0.039")

Below is another thing that compliments the thing being talked about.

Axle 5x35mm

This is a pair of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building and construction, black in color
Changes worn or damaged axles
Functions on the front or rear of the design

INCLUDES:
Two Axles

NEEDS:
Setup following the design handbook

SPECIFICATIONS:
Length: 1.37" (35mm)
Shaft Diameter: .20" (5mm) 4mm threaded

This thing compliments the above talked about thing.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

INCLUDES:
Ten nylon locking hex nuts

NEEDS:
Setup on the Scorpion

SPECIFICATIONS:
Thickness: 4mm
External size: 6mm
Inner size: 2mm

Below is another thing that compliments the thing being talked about.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

INCLUDES:
Ten M3 x 10mm screws

NEEDS:
Setup on car

COMMENTS:
Can be utilized anywhere this size screw is required