Axial O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

INCLUDES:
10 O-Rings

SPECS:
Outer Size: 5.5mm (0.22")
Inner Size: 2.5mm (0.10")
Density: 1.5mm (0.06")

This is a fantastic enhancement to the item currently being discussed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to car

SPECS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).

The listed below item also pairs really well with the item being discussed.



    This is a pair of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building and construction, grey in color
Replaces used or damaged differential gaskets

INCLUDES:
2 Differential Gaskets

NEEDS:
Setup following the model handbook

SPECS:
Outside Size: 1" (25mm)
Inside Size: .67" (17mm)
Density: .020" (.52mm)

Lots of others have actually acquired this item in addition to the item that you are currently reviewing.



These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building and construction
Orange in color

INCLUDES:
10 O-Rings

SPECS:
Outer Size: 6.5mm (0.25")
Inner Size: 5mm (0.196")
Density: 1mm (0.039")

Right here is another item that praises the item being discussed.

Axle 5x35mm

This is a pair of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building and construction, black in color
Replaces used or damaged axles
Functions on the front or rear of the model

INCLUDES:
2 Axles

NEEDS:
Setup following the model handbook

SPECS:
Length: 1.37" (35mm)
Shaft Size: .20" (5mm) 4mm threaded

This item praises the above discussed item.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

INCLUDES:
10 nylon locking hex nuts

NEEDS:
Setup on the Scorpion

SPECS:
Density: 4mm
Outer diameter: 6mm
Inner diameter: 2mm

Right here is another item that praises the item being discussed.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

INCLUDES:
10 M3 x 10mm screws

NEEDS:
Setup on car

COMMENTS:
Can be used any place this size screw is required