Axial Nylon Locknut M4 Black (10)

This is the M4 Nylon Lock Nut
for the Axial Scorpion Rock Crawler.

FEATURES:
Black oxide metal building

CONSISTS OF:
10 M4 nylon lock nuts

REQUIRES:
Installation on the Rock Spider

Want another excellent thing to enhance the above pointed out thing?

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FUNCTIONS:
Aluminum building, black in color
Replaces used or damaged hex hubs

CONSISTS OF:
Four aluminum hex hubs
Four steel drive pins
Four set screws

REQUIRES:
Installation following the design handbook

SPECIFICATIONS:
Size: .47" (12mm)

This thing is regularly bought with the above pointed out thing.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
10 nylon locking hex nuts

REQUIRES:
Installation on the Scorpion

SPECIFICATIONS:
Thickness: 4mm
External diameter: 6mm
Inner diameter: 2mm

The listed below thing also sets really well with the thing being gone over.

E-Clip E2.5 (10)

This is the 2.5mm E-Clips for the Axial Rock Crawler.

FEATURES:
Metal building, silver in color

CONSISTS OF:
10 2.5mm e-clips

REQUIRES:
Installation to the design

The listed below thing also sets really well with the thing being gone over.

King Kong Tow Shackle

This is the King King Tow Shackle for the 1/10 scale Warn Hook.

FEATURES:
Strong steel building
Fits the Z-S1011 1/10 Warn Hook, RC4C1011

CONSISTS OF:
King King Tow Shackle

SPECIFICATIONS:
Outer Width: 0.49" (12.49mm)
Inner Width: 0.24" (6.21mm) at widest point

Want another excellent thing to enhance the above pointed out thing?

Locked Transmission AX10 SCX10 Wraith

This is the optional Metal Equipment Set for the Locked Transmission
in the Axial AX10, SCX10 and Wraith.

FEATURES:
CNC machined steel equipments
Replaces stock plastic equipments
Ideal for high power applications with big brushless motors
Suitable with all Axial 3-gear transmissions

CONSISTS OF:
3 Steel Gears

Below is a excellent thing that many others have purchased the exact same time.

1/10 Hi-Lift Jack

Numerous others have bought this thing in addition to the thing that you are presently reviewing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want another excellent thing to enhance the above pointed out thing?

Rod Ends Revo Large W/ Hollow Balls

This is the Large Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building
Black in color
Metal Pivot Balls

CONSISTS OF:
12 Rod Ends
12 Pivot Balls

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Regularly bought with the thing that you are presently reviewing.

Hexagon Screw Driver

Using on heli's M2 socket screw and M3 socket screw!

Specs:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

This is a fantastic enhancement to the thing presently being gone over.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is ideal for all electronic applications.

Below is a excellent thing that many others have purchased the exact same time.

AM27 540 Electric Motor

This is the Axial 27T 540 Electric Motor.

FEATURES:
540 size can changes lots of stock motors

CONSISTS OF:
One 540 27T Electric Motor

REQUIRES:
ESC

SPECIFICATIONS:
Shaft Size: 3mm (0.12")
Shaft Length: 12.45mm (0.49")
Can Size: 36mm (1.42")
Can Length: 49.7mm (1.96")
Overall Length: 72mm (2.83")
Wire length: 88.9mm (3.5")
Specifications such as input voltage and weight were not offered by
manufacturer