Axial Nylon Locknut M4 Black (10)

This is the M4 Nylon Lock Nut
for the Axial Scorpion Rock Crawler.

FEATURES:
Black oxide metal construction

CONSISTS OF:
Ten M4 nylon lock nuts

REQUIRES:
Setup on the Rock Crawler

Want one more fantastic item to enhance the above stated item?

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FEATURES:
Aluminum construction, black in color
Replaces used or broken hex centers

CONSISTS OF:
4 aluminum hex centers
4 steel drive pins
4 set screws

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Size: .47" (12mm)

This item is often purchased with the above stated item.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

CONSISTS OF:
Ten nylon locking hex nuts

REQUIRES:
Setup on the Scorpion

SPECIFICATIONS:
Thickness: 4mm
Outer size: 6mm
Inner size: 2mm

The below item likewise sets actually well with the item being gone over.

E-Clip E2.5 (10)

This is the 2.5mm E-Clips for the Axial Rock Crawler.

FEATURES:
Metal construction, silver in color

CONSISTS OF:
Ten 2.5mm e-clips

REQUIRES:
Setup to the model

The below item likewise sets actually well with the item being gone over.

King Kong Tow Shackle

This is the King King Tow Shackle for the 1/10 scale Warn Hook.

FEATURES:
Strong steel construction
Fits the Z-S1011 1/10 Warn Hook, RC4C1011

CONSISTS OF:
King King Tow Shackle

SPECIFICATIONS:
Outer Width: 0.49" (12.49mm)
Inner Width: 0.24" (6.21mm) at best point

Want one more fantastic item to enhance the above stated item?

Locked Transmission AX10 SCX10 Wraith

This is the optional Metal Equipment Set for the Locked Transmission
in the Axial AX10, SCX10 and Wraith.

FEATURES:
CNC machined steel equipments
Replaces stock plastic equipments
Perfect for high power applications with huge brushless motors
Suitable with all Axial 3-gear transmissions

CONSISTS OF:
Two Steel Gears

Below is a fantastic item that several others have bought at the exact same time.

1/10 Hi-Lift Jack

Lots of others have purchased this item along with the item that you are presently checking out.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want one more fantastic item to enhance the above stated item?

Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic construction
Black in color
Metal Pivot Balls

CONSISTS OF:
12 Rod Ends
12 Pivot Balls

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Frequently purchased with the item that you are presently checking out.

Hexagon Screw Driver

Using on heli's M2 socket screw and M3 socket screw!

Specs:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

This is a superb addition to the item presently being gone over.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is ideal for all electronic applications.

Below is a fantastic item that several others have bought at the exact same time.

AM27 540 Electric Motor

This is the Axial 27T 540 Electric Motor.

FEATURES:
540 size can changes numerous stock motors

CONSISTS OF:
One 540 27T Electric Motor

REQUIRES:
ESC

SPECIFICATIONS:
Shaft Size: 3mm (0.12")
Shaft Length: 12.45mm (0.49")
Can Size: 36mm (1.42")
Can Length: 49.7mm (1.96")
Overall Length: 72mm (2.83")
Wire length: 88.9mm (3.5")
Specifications such as input voltage and weight were not supplied by
producer