Axial Input Shaft 5x29mm (2)

These are the Input Shafts for the Axial Wraith Rock Racer.

FEATURES:
Steel building
Holds bevel gear in place inside transmission

CONSISTS OF:
Two 5x29mm Input Shafts

NEEDS:
Disassembly of transmission to install

This product is often acquired with the above stated product.

E-Clip E2.5 (10)

This is the 2.5mm E-Clips for the Axial Rock Crawler.

FEATURES:
Metal building, silver in color

CONSISTS OF:
10 2.5mm e-clips

NEEDS:
Installation to the model

The below product also pairs truly well with the product being discussed.



These are the optional ST Racing Front and Rear Lower Suspension Links
for the Axial SCX10.

FEATURES:
CNC machined aluminum building, silver in color
Fits the Axial SCX10 cars with a wheelbase of 12" (305mm)
    consisting of the Deadbolt, Falken Tires JK, and Recon G6 JK

CONSISTS OF:
Two Front Links
Two Rear Links
8 M3x16mm Set Screws

NEEDS:
Two AX80005 Axial Rod Ends, AXIC3805
Two AX80018 Axial Rod End Links, AXIC3818

COMMENTS:
(Any special application or something it will not work with?)

The below product also pairs truly well with the product being discussed.

Castle Bec 10Amp (25 Volt Max Input)

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations.

FEATURES:
Removes the need for a receiver and servo battery pack
Draws higher voltage from the motor batteries and drops it to a
    voltage level ideal for the receiver and servos

CONSISTS OF:
One CC BEC receiver battery remover

NEEDS:
Installation in the aircraft

SPECS:
Length: 1.2" (30mm)
Width: .6" (15mm)
Height: .4" (10mm)
Weight: .4oz (11g)
Input voltage: 5V to 25.2V (2S to SIX LiPo)
Current output: 12 volts input = 7 amps* continuous, 10 amp peak;
    24 volts input = 5 amps* continuous, 7 amp peak
    *Ratings are identified with a 5mph airflow on the BEC
Selectable Output: 4.8 - 9.0V by means of the Castle Link (sold individually)
    Default voltage is 5.1V

Want one more excellent product to match the above stated product?



This is the replacement Bevel Gear Set for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Aluminum building, silver in color
Changes a used or damaged bevel gear set

CONSISTS OF:
One 38 Tooth Big Bevel Gear
One 13 Tooth Small Bevel Gear

NEEDS:
Installation following the model manual

COMMENTS:
For the heavy-duty version of this gear set order AXIC0395