Axial Hex Socket Tap Flat Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Installation on automobile

COMMENTS:
Can be used where ever this size screw is required

This item compliments the above gone over item.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic connector body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male connector (pins on both sides)
One male-female connector (pins on one side)
Two pieces of small Red heat-shrinkable tubing
Two pieces of small Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering weapon

SPECS:
Overall length linked: .940" (24mm)
Length of plastic body, linked: .574" (14.6mm)
Pin length, six places: .181" (4.6mm)
Width between pins: .058" (1.4mm)

COMMENTS:
The connector is NOT compatible with small White
    Futaba transmitter battery ports.

Get this item to boost the one you are reading around.

Hardened Universal Shaft For Axial Ax10 Scorpion

Junfac Hardened Universal Shaft For Axial AX10 Scorpion

Right here is one more item that compliments the item being gone over.

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber building
Replaces used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

REQUIRES:
Installing in slipper clutch assembly following directions in
    manual

This item compliments the main item right here.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic building

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Installation on the Rock Crawler

This item compliments the above gone over item.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
10 nylon locking hex nuts

REQUIRES:
Installation on the Scorpion

SPECS:
Density: 4mm
External diameter: 6mm
Inner diameter: 2mm

This is a fantastic addition to the item currently being gone over.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Installation on automobile

COMMENTS:
Can be used anywhere this size screw is required

Right here is a terrific item that many others have purchased the same time.

Hex Socket Tap Flat Head M3x12mm Black (10)

These are the Axial M3x12mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 12mm screws

REQUIRES:
Installation on automobile

COMMENTS:
Can be used where ever this size screw is required

Get this item to boost the one you are reading around.

Hex Socket Tap Flat Head M3x30mm Black (10)

These are the Axial M3x30mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 30mm screws

REQUIRES:
Installation on automobile

COMMENTS:
Can be used anywhere this size screw is required