Axial Hex Socket Tap Flat Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Setup on vehicle

COMMENTS:
Can be used where ever this size screw is required

This item praises the above discussed item.

Micro 2Npr Red Non-Polarized Connector

This is the 2NR Micro Plug from WS Deans.
It is a non-polarized plug with gold-plated pins.

FEATURES:
Plastic adapter body, Red in color
Non-polarized
Gold-plated pins

CONSISTS OF:
One male-male adapter (pins on both sides)
One male-female adapter (pins on one side)
2 pieces of little Red heat-shrinkable tubing
2 pieces of little Black heat-shrinkable tubing

REQUIRES:
Solder, soldering iron (HCAR0775) or soldering gun

SPECS:
Total length connected: .940" (24mm)
Length of plastic body, connected: .574" (14.6mm)
Pin length, 6 places: .181" (4.6mm)
Width in between pins: .058" (1.4mm)

COMMENTS:
The adapter is NOT suitable with little White
    Futaba transmitter battery adapters.

Get this item to improve the one you read around.

Hardened Universal Shaft For Axial Ax10 Scorpion

Junfac Hardened Universal Shaft For Axial AX10 Scorpion

Right here is another item that praises the item being discussed.

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber building and construction
Replaces worn slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

REQUIRES:
Setting up in slipper clutch assembly following guidelines in
    manual

This item praises the main item below.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Setup on the Rock Spider

This item praises the above discussed item.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
10 nylon locking hex nuts

REQUIRES:
Setup on the Scorpion

SPECS:
Density: 4mm
Outer diameter: 6mm
Inner diameter: 2mm

This is a superb addition to the item presently being discussed.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Setup on vehicle

COMMENTS:
Can be used any place this size screw is required

Right here is a fantastic item that several others have actually purchased the same time.

Hex Socket Tap Flat Head M3x12mm Black (10)

These are the Axial M3x12mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
10 M3 x 12mm screws

REQUIRES:
Setup on vehicle

COMMENTS:
Can be used where ever this size screw is required

Get this item to improve the one you read around.

Hex Socket Tap Flat Head M3x30mm Black (10)

These are the Axial M3x30mm Hex Socket Tapping Flat Head Screws.

FEATURES:
Black metal building and construction

CONSISTS OF:
10 M3 x 30mm screws

REQUIRES:
Setup on vehicle

COMMENTS:
Can be used any place this size screw is required