Axial Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
Four 3x4.5x5.5 flange pipelines

NEEDS:
Installation on the Rock Spider

SPECIFICATIONS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at smallest point
Size: .27" (7mm) at largest point

Right here is a fantastic thing that several others have bought at the exact same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building

CONSISTS OF:
One 48DP 87T spur gear

NEEDS:
Installation on the Rock Spider

Want an additional fantastic thing to enhance the above stated thing?



This is the Steering Knuckle Set for the Axial XR10.

FEATURES:
Solidified plastic building

CONSISTS OF:
Two-piece electronic tray, rubber gasket and two foam pads

NEEDS:
2 5x11mm ball bearings, order DTXC1547
2 10x15mm ball bearings, order DTXC1595

Want an additional fantastic thing to enhance the above stated thing?



This is a set of ST Racing Principles Aluminum Steering Knuckles for the
Axial SCX10/AX10.

FEATURES:
Machined aluminum building, gun metal gray in color
Changes stock plastic steering knuckles
CNC machined aluminum rear link ball studs

CONSISTS OF:
Left and Right Guiding Knuckles
2 Rear Link Ball Studs

Want an additional fantastic thing to enhance the above stated thing?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber building
Changes worn slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

NEEDS:
Setting up in slipper clutch assembly following directions in
    handbook

Right here is a fantastic thing that several others have bought at the exact same time.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

CONSISTS OF:
10 nylon locking hex nuts

NEEDS:
Installation on the Scorpion

SPECIFICATIONS:
Thickness: 4mm
External size: 6mm
Inner size: 2mm

Numerous others have purchased this thing in addition to the thing that you are currently reading about.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 10mm screws

NEEDS:
Installation on automobile

REMARKS:
Can be utilized any place this size screw is needed

Numerous others have purchased this thing in addition to the thing that you are currently reading about.

Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Sealed design helps keep the bearing running smooth and friction free

CONSISTS OF:
2 Bearings

NEEDS:
Installation following the model handbook

SPECIFICATIONS:
Inside Size: 5mm
Outside Size: 11mm
Thickness: 4mm

You will certainly love this thing if you have the thing above stated.

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Shielded to help keep the bearing running smooth and friction free

CONSISTS OF:
2 Bearings

NEEDS:
Installation following the model handbook

SPECIFICATIONS:
Inside Size: 10mm
Outside Size: 15mm
Thickness: 4mm