Axial Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

INCLUDES:
4 3x4.5x5.5 flange pipes

NEEDS:
Installation on the Rock Spider

SPECS:
Length: .21" (5.5mm)
Diameter: .17" (4.5mm) at tiniest point
Diameter: .27" (7mm) at largest point

Right here is a fantastic item that numerous others have actually bought at the very same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building and construction

INCLUDES:
One 48DP 87T spur gear

NEEDS:
Installation on the Rock Spider

Want an additional fantastic item to enhance the above discussed item?



This is the Steering Knuckle Set for the Axial XR10.

FEATURES:
Hardened plastic building and construction

INCLUDES:
Two-piece electronic tray, rubber gasket and 2 foam pads

NEEDS:
2 5x11mm ball bearings, order DTXC1547
2 10x15mm ball bearings, order DTXC1595

Want an additional fantastic item to enhance the above discussed item?



This is a pair of ST Racing Principles Aluminum Steering Knuckles for the
Axial SCX10/AX10.

FUNCTIONS:
Machined aluminum building and construction, weapon metal gray in color
Changes stock plastic steering knuckles
CNC machined aluminum rear link ball studs

INCLUDES:
Left and Right Guiding Knuckles
2 Rear Link Ball Studs

Want an additional fantastic item to enhance the above discussed item?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber building and construction
Changes worn slipper pads

INCLUDES:
Slipper Pad for the Axial Scorpion

NEEDS:
Installing in slipper clutch assembly following guidelines in
    handbook

Right here is a fantastic item that numerous others have actually bought at the very same time.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

INCLUDES:
Ten nylon locking hex nuts

NEEDS:
Installation on the Scorpion

SPECS:
Thickness: 4mm
External diameter: 6mm
Inner diameter: 2mm

Several others have actually gotten this item along with the item that you are currently checking out.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building and construction

INCLUDES:
Ten M3 x 10mm screws

NEEDS:
Installation on automobile

REMARKS:
Can be used anywhere this size screw is required

Several others have actually gotten this item along with the item that you are currently checking out.

Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Sealed design assists keep the bearing running smooth and friction complimentary

INCLUDES:
2 Bearings

NEEDS:
Installation following the design handbook

SPECS:
Inside Diameter: 5mm
Outside Diameter: 11mm
Thickness: 4mm

You will certainly enjoy this item if you have the item above stated.

Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building and construction, silver in color
Shielded to assist keep the bearing running smooth and friction complimentary

INCLUDES:
2 Bearings

NEEDS:
Installation following the design handbook

SPECS:
Inside Diameter: 10mm
Outside Diameter: 15mm
Thickness: 4mm