Axial Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

INCLUDES:
Four 3x4.5x5.5 flange pipelines

REQUIRES:
Setup on the Rock Crawler

SPECS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at smallest point
Size: .27" (7mm) at largest point

Right here is a great thing that numerous others have actually purchased the exact same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic construction

INCLUDES:
One 48DP 87T spur gear

REQUIRES:
Setup on the Rock Crawler

Want an additional great thing to match the above pointed out thing?



This is the Steering Knuckle Set for the Axial XR10.

FEATURES:
Solidified plastic construction

INCLUDES:
Two-piece electronic tray, rubber gasket and 2 foam pads

REQUIRES:
Two 5x11mm ball bearings, order DTXC1547
Two 10x15mm ball bearings, order DTXC1595

Want an additional great thing to match the above pointed out thing?



This is a pair of ST Racing Concepts Aluminum Steering Knuckles for the
Axial SCX10/AX10.

FEATURES:
Machined aluminum construction, weapon metal gray in color
Replaces stock plastic guiding knuckles
CNC machined aluminum rear link ball studs

INCLUDES:
Left and Right Guiding Knuckles
Two Rear Link Ball Studs

Want an additional great thing to match the above pointed out thing?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber construction
Replaces used slipper pads

INCLUDES:
Slipper Pad for the Axial Scorpion

REQUIRES:
Setting up in slipper clutch assembly following directions in
    handbook

Right here is a great thing that numerous others have actually purchased the exact same time.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

INCLUDES:
Ten nylon locking hex nuts

REQUIRES:
Setup on the Scorpion

SPECS:
Thickness: 4mm
External diameter: 6mm
Inner diameter: 2mm

Many others have actually acquired this thing together with the thing that you are currently reading about.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal construction

INCLUDES:
Ten M3 x 10mm screws

REQUIRES:
Setup on car

REMARKS:
Can be used wherever this size screw is needed

Many others have actually acquired this thing together with the thing that you are currently reading about.

Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel construction, silver in color
Sealed design helps keep the bearing running smooth and friction free

INCLUDES:
Two Bearings

REQUIRES:
Setup following the model handbook

SPECS:
Inside Size: 5mm
Outside Size: 11mm
Thickness: 4mm

You will like this thing if you have the thing just above mentioned.

Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Protected to help keep the bearing running smooth and friction free

INCLUDES:
Two Bearings

REQUIRES:
Setup following the model handbook

SPECS:
Inside Size: 10mm
Outside Size: 15mm
Thickness: 4mm