Axial Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipeline
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

CONSISTS OF:
4 3x4.5x5.5 flange pipelines

REQUIRES:
Setup on the Rock Crawler

SPECIFICATIONS:
Length: .21" (5.5mm)
Diameter: .17" (4.5mm) at tiniest point
Diameter: .27" (7mm) at largest point

Below is a fantastic product that numerous others have bought at the same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic construction

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Setup on the Rock Crawler

Want an additional fantastic product to compliment the above discussed product?



This is the Steering Knuckle Set for the Axial XR10.

FEATURES:
Hardened plastic construction

CONSISTS OF:
Two-piece electronic tray, rubber gasket and 2 foam pads

REQUIRES:
2 5x11mm ball bearings, order DTXC1547
2 10x15mm ball bearings, order DTXC1595

Want an additional fantastic product to compliment the above discussed product?



This is a set of ST Racing Concepts Aluminum Steering Knuckles for the
Axial SCX10/AX10.

FUNCTIONS:
Machined aluminum construction, weapon metal gray in color
Replaces stock plastic steering knuckles
CNC machined aluminum rear link ball studs

CONSISTS OF:
Left and Right Steering Knuckles
2 Rear Link Ball Studs

Want an additional fantastic product to compliment the above discussed product?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber construction
Replaces used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

REQUIRES:
Setting up in slipper clutch assembly following directions in
    handbook

Below is a fantastic product that numerous others have bought at the same time.

Nylon Locking Hex Nut M3 Black (10)

This is the M3 Nylon Locking Hex Nuts from Axial
for the Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

CONSISTS OF:
Ten nylon locking hex nuts

REQUIRES:
Setup on the Scorpion

SPECIFICATIONS:
Density: 4mm
Outer size: 6mm
Inner size: 2mm

Many others have gotten this product in addition to the product that you are currently checking out.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal construction

CONSISTS OF:
Ten M3 x 10mm screws

REQUIRES:
Setup on automobile

REMARKS:
Can be utilized any place this size screw is required

Many others have gotten this product in addition to the product that you are currently checking out.

Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 5mm
Outside Diameter: 11mm
Density: 4mm

You will certainly like this product if you have the product above stated.

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Protected to assist keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 10mm
Outside Diameter: 15mm
Density: 4mm