Axial Diff Gasket 16x25x0.5mm

    This is a pair of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building, grey in color
Changes used or broken differential gaskets

CONSISTS OF:
Two Differential Gaskets

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Outside Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Density: .020" (.52mm)

You will certainly enjoy this thing if you have the thing just above stated.



This is the Sturdy Bevel Gear Set for use on the
Axial AX10 Scorpion.

FEATURES:
Provides lower gear ratio and minimizes torque twist
Steel building

CONSISTS OF:
One 13T Bevel Gear
One 43T Bevel Gear

REQUIRES:
Setup on the vehicle

The listed below product additionally sets truly well with the product being talked about.

Diff Case Small

This is the Little Differential Case for the Axial Rock Crawler.

FEATURES:
Plastic building, black in color

CONSISTS OF:
Two little differential cases

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Diameter: .98" (25mm)
Height: .66" (17mm)

Lots of others have acquired this product together with the product that you are presently checking out.

O-Ring 5x1mm (10)

These are the 5x1mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

CONSISTS OF:
10 O-Rings

SPECIFICATIONS:
Outer Diameter: 6.5mm (0.25")
Inner Diameter: 5mm (0.196")
Density: 1mm (0.039")

Lots of others have acquired this product together with the product that you are presently checking out.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

This is a superb enhancement to the product presently being talked about.

O-Ring 2.5x1.5mm (10)

These are the 2.5x1.5mm O-Rings from Axial.

FEATURES:
Rubber building
Orange in color

CONSISTS OF:
10 O-Rings

SPECIFICATIONS:
Outer Diameter: 5.5mm (0.22")
Inner Diameter: 2.5mm (0.10")
Density: 1.5mm (0.06")

Right here is one more product that compliments the product being talked about.

Axle 5x35mm

This is a pair of replacement Axles
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Steel building, black in color
Changes used or broken axles
Functions on the front or rear of the model

CONSISTS OF:
Two Axles

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Length: 1.37" (35mm)
Shaft Diameter: .20" (5mm) 4mm threaded

This is a superb enhancement to the product presently being talked about.

Aluminum Hub Narrow 12mm Black (4)

These are the 12mm Narrow Aluminum Hex Hubs from Axial.

FEATURES:
Aluminum building, black in color
Changes used or broken hex centers

CONSISTS OF:
4 aluminum hex centers
4 steel drive pins
4 set screws

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Hex Size: .47" (12mm)

Right here is a wonderful product that lots of others have bought at the very same time.



These are the Axial M3x61mm Hex Socket Button Head Screws.

FEATURES:
Steel building. black in color

CONSISTS OF:
6 M3x61mm Hex Socket Button Head Screws

REQUIRES:
2mm hex wrench

SPECIFICATIONS:
Diameter: 3mm
Length: 61mm
Length of Threaded Area: 8mm

This product compliments the above talked about product.

Hex Tap Button Head M3x10mm Black (10)

These are the Axial M3x10mm Hex Socket Tapping Button Head Screws.

FEATURES:
Black metal building

CONSISTS OF:
10 M3 x 10mm screws

REQUIRES:
Setup on vehicle

REMARKS:
Can be used any place this size screw is required