Axial Body Clip 6mm Black (10)

This is a plan of Ten Body Clips from Axial.

FEATURES:
Steel construction, black in color

INCLUDES:
Ten 6mm body clips

SPECIFICATIONS:
Length: .82" (21mm)

You will love this item if you have the item earlier stated.

Landing Skid

Requirements:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Right here is a excellent product that numerous others have bought at the same time.

Hexagon Screw Driver

Utilizing on heli's M2 socket screw and M3 socket screw!

Requirements:
1.5mm(Black/26.6g)x1
2.0mm(Blue/28.6g)x1
2.5mm(Purple/29.5g)x1
3.0mm(Red/31g)x1

Want an additional excellent product to enhance the above stated product?



This is the DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery Load
with Standard Connector.

FEATURES:
Suitable sport pack for vehicles, trucks and boats

INCLUDES:
DuraTrax NiMH 7.2V 5000mAh Onyx Stick Battery with Basic
    Connector

NEEDS:
NiMH compatible battery charger such as the Duratrax Onyx series

SPECIFICATIONS:
Capability: 5000mAh
Variety of Cells in Series: 6
Rated Voltage: 7.2V
Min. Release Voltage: 5.4V
Optimum Recommended Charge Current: 5 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Standard adapter
Load Measurements: 5.3 x 1.8 x 0.94" (135 x 45 x 24mm)
Weight: 15.6 oz (442 g)
Variety of Welds per Connection: 6 area welds
Cell Size: Sub-C

The listed below product also pairs really well with the product being talked about.



This is the 7.4V TWO 15C 250mAh LiPo Battery from Venom-Group.

FUNCTIONS:
Created for use with the Losi micro 1/24 scale rally vehicles, 4WD
    brief course trucks and little indoor airplane
Pre-wired with a Molex 51005 adapter and XH design balance adapter

INCLUDES:
7.4V TWO 15C 250mAh LiPo Battery with Molex 51005 Connector and XH
    Balance Connector

NEEDS:
LiPo battery charger with balancing ability

SPECIFICATIONS:
Configuration: 2S1P
Weight: 0.56 oz (16g)
Measurements: 1.3 x 0.51 x 0.83" (33 x 13 x 21mm)
Continuous Discharge: 15C (3.75A)
Max Burst Rate: 30C (7.5A)
Watt Hours: 1.85

COMMENTS:
READ the WHOLE guidelines before use
ALWAYS use a LiPo-approved battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or puncture cells
NEVER place on flammable materials or leave ignored during
    Charging
ALWAYS charge in a fireproof area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS shut out of reach of children

This product compliments the above talked about product.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Equipment for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic construction

INCLUDES:
One 48DP 87T spur equipment

NEEDS:
Setup on the Rock Crawler

Several others have bought this product in addition to the product that you are currently checking out.

Hex Socket Button Head Black M3x6mm (10)

These are the 3x6mm Hex Socket Button Head Screws used on the
Axial Wraith Rock Racer.

FEATURES:
Steel construction, black in color

INCLUDES:
Ten 3x6mm Hex Socket Button Head Screws

NEEDS:
2mm hex wrench, GPMR8011

SPECIFICATIONS:
Length: 6mm
Diameter: 3mm