Axial Bearing 8x16x5mm

This is a set of replacement 8x16x5mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Sealed design helps keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the design manual

SPECIFICATIONS:
Inside Diameter: 8mm
Outside Diameter: 16mm
Density: 5mm

Get this product to boost the one you read about.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless steel building, silver in color
Protected to assist keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the design manual

SPECIFICATIONS:
Inside Diameter: 15mm
Outside Diameter: 21mm
Density: 4mm

Here is a fantastic product that several others have actually purchased the same time.



These are the Differential Output Shafts
for the Axial Yeti and Yeti XL Beast Buggy Rock Racer.

FEATURES:
Steel building
Transfers power from the differential to the axles

CONSISTS OF:
Two Differential Output Shafts

Here is a fantastic product that several others have actually purchased the same time.



This product compliments the main item here.

Hex Socket Flat Head M3x18mm Black (10)

This is a plan of ten 3x18mm Hex Socket Flat Head Screws from Axial.

FEATURES:
Steel building, black in color

CONSISTS OF:
Ten 3x18mm Hex Socket Flat Head Screws

REQUIRES:
2mm Hex wrench, GPMR8011

SPECIFICATIONS:
Length: 18mm
Diameter: 3mm

Several others have actually acquired this product in addition to the product that you are currently reading about.

Bearing 5x10x4mm

This is a set of replacement 5x10x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Sealed design helps keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the design manual

SPECIFICATIONS:
Inside Diameter: 5mm
Outside Diameter: 10mm
Density: 4mm

The below product also sets really well with the product being discussed.

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Protected to assist keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the design manual

SPECIFICATIONS:
Inside Diameter: 10mm
Outside Diameter: 15mm
Density: 4mm