Axial Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building and construction, silver in color
Sealed design assists keep the bearing running smooth and friction complimentary

INCLUDES:
2 Bearings

REQUIRES:
Setup following the model handbook

SPECS:
Inside Size: 5mm
Outside Size: 11mm
Thickness: 4mm

Want one more excellent product to enhance the above discussed product?

Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building and construction, silver in color
Protected to help keep the bearing running smooth and friction complimentary

INCLUDES:
2 Bearings

REQUIRES:
Setup following the model handbook

SPECS:
Inside Size: 10mm
Outside Size: 15mm
Thickness: 4mm

This product is often bought with the above discussed product.

Bearing 15x21x4mm (2)

This is a pair of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless-steel building and construction, silver in color
Protected to help keep the bearing running smooth and friction complimentary

INCLUDES:
2 Bearings

REQUIRES:
Setup following the model handbook

SPECS:
Inside Size: 15mm
Outside Size: 21mm
Thickness: 4mm

Get this product to improve the one you read around.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles significantly improves
the durability on your Axial Wraith, and improves the steering
response by taking out any flex of the stock plastic unit. The
C-Hubs likewise includes more durability and eliminate any unwanted flex for
the Axial Wraith and it has the exact same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 steering knuckles
Four M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Set (AXID9020)

Right here is one more product that praises the product being reviewed.



This is the 38T Heavy Duty Bevel Gear Set for the Scorpion.

FEATURES:
Metal building and construction, black in color

INCLUDES:
One pinion gear
One 38T gear

REQUIRES:
Setup

Want one more excellent product to enhance the above discussed product?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pushed fiber building and construction
Changes used slipper pads

INCLUDES:
Slipper Pad for the Axial Scorpion

REQUIRES:
Installing in slipper clutch assembly following instructions in
    handbook

Lots of others have actually bought this product together with the product that you are presently reviewing.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic building and construction

INCLUDES:
One 48DP 87T stimulate gear

REQUIRES:
Setup on the Rock Crawler

The listed below product also sets truly well with the product being reviewed.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

INCLUDES:
Four 3x4.5x5.5 flange pipelines

REQUIRES:
Setup on the Rock Crawler

SPECS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at tiniest point
Size: .27" (7mm) at largest point