Axial Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Sealed design helps keep the bearing running smooth and friction complimentary

INCLUDES:
Two Bearings

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 5mm
Outdoors Diameter: 11mm
Density: 4mm

Want one more great item to enhance the above mentioned item?

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel construction, silver in color
Shielded to assist keep the bearing running smooth and friction complimentary

INCLUDES:
Two Bearings

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 10mm
Outdoors Diameter: 15mm
Density: 4mm

This item is often gotten with the above mentioned item.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless steel construction, silver in color
Shielded to assist keep the bearing running smooth and friction complimentary

INCLUDES:
Two Bearings

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 15mm
Outdoors Diameter: 21mm
Density: 4mm

Get this item to enhance the one you are reading around.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles considerably improves
the resilience on your Axial Wraith, and improves the steering
response by taking out any flex of the stock plastic system. The
C-Hubs also adds more resilience and eliminate any undesirable flex for
the Axial Wraith and it has the same measurements and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
Two guiding knuckles
4 M39x9mm cap head screws with hex sockets

SPECIFICATIONS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)

Right here is one more item that praises the item being reviewed.



This is the 38T Heavy Duty Bevel Gear Set for the Scorpion.

FEATURES:
Metal construction, black in color

INCLUDES:
One pinion gear
One 38T gear

NEEDS:
Setup

Want one more great item to enhance the above mentioned item?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber construction
Replaces worn slipper pads

INCLUDES:
Slipper Pad for the Axial Scorpion

NEEDS:
Installing in slipper clutch assembly following directions in
    handbook

Several others have actually gotten this item together with the item that you are presently reviewing.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic construction

INCLUDES:
One 48DP 87T spur gear

NEEDS:
Setup on the Rock Crawler

The listed below item also pairs truly well with the item being reviewed.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipeline
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

INCLUDES:
4 3x4.5x5.5 flange pipes

NEEDS:
Setup on the Rock Crawler

SPECIFICATIONS:
Length: .21" (5.5mm)
Diameter: .17" (4.5mm) at tiniest point
Diameter: .27" (7mm) at largest point