Axial Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

REQUIRES:
Setup following the design handbook

SPECIFICATIONS:
Inside Size: 5mm
Outdoors Size: 11mm
Thickness: 4mm

Want another great product to match the above mentioned product?

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Protected to help keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

REQUIRES:
Setup following the design handbook

SPECIFICATIONS:
Inside Size: 10mm
Outdoors Size: 15mm
Thickness: 4mm

This product is often purchased with the above mentioned product.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless-steel building, silver in color
Protected to help keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

REQUIRES:
Setup following the design handbook

SPECIFICATIONS:
Inside Size: 15mm
Outdoors Size: 21mm
Thickness: 4mm

Get this product to enhance the one you are reading around.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FUNCTIONS:
Our CNC Machined Aluminum Front Steering knuckles greatly enhances
the resilience on your Axial Wraith, and enhances the steering
reaction by securing any flex of the stock plastic unit. The
C-Hubs also adds more resilience and remove any unwanted flex for
the Axial Wraith and it has the very same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 guiding knuckles
Four M39x9mm cap head screws with hex sockets

SPECIFICATIONS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Set (AXID9020)

Here is another product that compliments the product being discussed.



This is the 38T Heavy Duty Bevel Gear Set for the Scorpion.

FEATURES:
Metal building, black in color

INCLUDES:
One pinion gear
One 38T gear

REQUIRES:
Setup

Want another great product to match the above mentioned product?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber building
Changes worn slipper pads

INCLUDES:
Slipper Pad for the Axial Scorpion

REQUIRES:
Setting up in slipper clutch assembly following directions in
    handbook

Lots of others have purchased this product in addition to the product that you are presently reading about.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building

INCLUDES:
One 48DP 87T spur gear

REQUIRES:
Setup on the Rock Spider

The listed below product additionally pairs really well with the product being discussed.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building, black in color

INCLUDES:
Four 3x4.5x5.5 flange pipelines

REQUIRES:
Setup on the Rock Spider

SPECIFICATIONS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at smallest point
Size: .27" (7mm) at biggest point