Axial Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel construction, silver in color
Sealed design assists keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 5mm
Outside Diameter: 11mm
Density: 4mm

Want another terrific item to compliment the above stated item?

Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel construction, silver in color
Shielded to assist keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 10mm
Outside Diameter: 15mm
Density: 4mm

This item is frequently gotten with the above stated item.

Bearing 15x21x4mm (2)

This is a pair of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless-steel construction, silver in color
Shielded to assist keep the bearing running smooth and friction free

INCLUDES:
2 Bearings

NEEDS:
Setup following the model handbook

SPECIFICATIONS:
Inside Diameter: 15mm
Outside Diameter: 21mm
Density: 4mm

Get this item to improve the one you read about.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles considerably enhances
the durability on your Axial Wraith, and enhances the steering
reaction by taking out any flex of the stock plastic unit. The
C-Hubs also includes more durability and remove any unwanted flex for
the Axial Wraith and it has the exact same measurements and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 steering knuckles
Four M39x9mm cap head screws with hex sockets

SPECIFICATIONS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)

Right here is another item that praises the item being discussed.

H/D Bevel Gear 38T Scorpion

This is the 38T Heavy Duty Bevel Gear Set for the Scorpion.

FEATURES:
Metal construction, black in color

INCLUDES:
One pinion gear
One 38T gear

NEEDS:
Setup

Want another terrific item to compliment the above stated item?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber construction
Replaces used slipper pads

INCLUDES:
Slipper Pad for the Axial Scorpion

NEEDS:
Setting up in slipper clutch assembly following guidelines in
    handbook

Several others have gotten this item together with the item that you are currently reading about.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic construction

INCLUDES:
One 48DP 87T stimulate gear

NEEDS:
Setup on the Rock Spider

The listed below item additionally pairs actually well with the item being discussed.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipes
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal construction, black in color

INCLUDES:
Four 3x4.5x5.5 flange pipelines

NEEDS:
Setup on the Rock Spider

SPECIFICATIONS:
Length: .21" (5.5mm)
Diameter: .17" (4.5mm) at smallest point
Diameter: .27" (7mm) at largest point