Axial Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building and construction, silver in color
Sealed design helps keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design handbook

SPECIFICATIONS:
Inside Size: 5mm
Outside Size: 11mm
Density: 4mm

Want an additional wonderful thing to compliment the above stated thing?

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building and construction, silver in color
Shielded to help keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design handbook

SPECIFICATIONS:
Inside Size: 10mm
Outside Size: 15mm
Density: 4mm

This thing is regularly acquired with the above stated thing.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless-steel building and construction, silver in color
Shielded to help keep the bearing running smooth and friction totally free

CONSISTS OF:
2 Bearings

NEEDS:
Setup following the design handbook

SPECIFICATIONS:
Inside Size: 15mm
Outside Size: 21mm
Density: 4mm

Get this thing to improve the one you read about.



These are the CNC Machined Precision Aluminum Steering Knuckles
For the Axial Wraith

FEATURES:
Our CNC Machined Aluminum Front Steering knuckles significantly improves
the durability on your Axial Wraith, and improves the steering
response by taking out any flex of the stock plastic system. The
C-Hubs likewise adds more durability and remove any unwanted flex for
the Axial Wraith and it has the same measurements and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 guiding knuckles
4 M39x9mm cap head screws with hex sockets

SPECIFICATIONS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Package (AXID9020)

Here is an additional thing that praises the thing being talked about.



This is the 38T Strong Bevel Gear Set for the Scorpion.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
One pinion gear
One 38T gear

NEEDS:
Setup

Want an additional wonderful thing to compliment the above stated thing?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber building and construction
Changes used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

NEEDS:
Setting up in slipper clutch assembly following instructions in
    handbook

Many others have actually acquired this thing in addition to the thing that you are presently reviewing.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One 48DP 87T stimulate gear

NEEDS:
Setup on the Rock Spider

The listed below thing also sets actually well with the thing being talked about.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Pipeline
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
4 3x4.5x5.5 flange pipelines

NEEDS:
Setup on the Rock Spider

SPECIFICATIONS:
Length: .21" (5.5mm)
Size: .17" (4.5mm) at tiniest point
Size: .27" (7mm) at biggest point