Axial Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building and construction, silver in color
Sealed design helps keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Diameter: 5mm
Outdoors Diameter: 11mm
Density: 4mm

Want one more fantastic item to compliment the above stated item?

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building and construction, silver in color
Shielded to help keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Diameter: 10mm
Outdoors Diameter: 15mm
Density: 4mm

This item is regularly purchased with the above stated item.

Bearing 15x21x4mm (2)

This is a set of 10x15x4mm Bearings from Axial.

FEATURES:
Stainless-steel building and construction, silver in color
Shielded to help keep the bearing running smooth and friction complimentary

CONSISTS OF:
2 Bearings

REQUIRES:
Setup following the design manual

SPECS:
Inside Diameter: 15mm
Outdoors Diameter: 21mm
Density: 4mm

Get this item to improve the one you are reading around.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FUNCTIONS:
Our CNC Machined Aluminum Front Steering knuckles considerably enhances
the resilience on your Axial Wraith, and enhances the steering
reaction by taking out any flex of the stock plastic unit. The
C-Hubs likewise includes more resilience and take away any unwanted flex for
the Axial Wraith and it has the exact same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
2 steering knuckles
Four M39x9mm cap head screws with hex sockets

SPECS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

COMMENTS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)

Here is one more item that compliments the item being talked about.



This is the 38T Heavy Duty Bevel Gear Set for the Scorpion.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
One pinion gear
One 38T gear

REQUIRES:
Setup

Want one more fantastic item to compliment the above stated item?

Slipper Pad 27x8x1mm

This is the Slipper Pad for the Axial Scorpion.

FEATURES:
Pressed fiber building and construction
Replaces used slipper pads

CONSISTS OF:
Slipper Pad for the Axial Scorpion

REQUIRES:
Installing in slipper clutch assembly following guidelines in
    manual

Several others have actually purchased this item together with the item that you are currently reading about.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Spider AXIC9001.

FEATURES:
Black plastic building and construction

CONSISTS OF:
One 48DP 87T stimulate gear

REQUIRES:
Setup on the Rock Spider

The listed below item likewise pairs actually well with the item being talked about.

Flange Pipe 3x4.5x5.5 (4)

These are the 3x4.5x5.5 Flange Water lines
for the Axial Scorpion Rock Crawler.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
Four 3x4.5x5.5 flange pipes

REQUIRES:
Setup on the Rock Spider

SPECS:
Length: .21" (5.5mm)
Diameter: .17" (4.5mm) at smallest point
Diameter: .27" (7mm) at biggest point