Axial Bearing 5x10x4mm

This is a set of replacement 5x10x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

INCLUDES:
Two Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Size: 5mm
Outside Size: 10mm
Density: 4mm

The listed below item likewise pairs truly well with the item being gone over.

Bearing 10x15x4mm

This is a set of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Shielded to assist keep the bearing running smooth and friction totally free

INCLUDES:
Two Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Size: 10mm
Outside Size: 15mm
Density: 4mm

Lots of others have purchased this item along with the item that you are currently reviewing.

Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is perfect for 1/10 scale vehicles, trucks, and buggies! Features a huge capability for extended run times and a massive C rating so you'll have all the power you'll ever need. Consists of a Deans-type port on the discharge leads.
Features

High-end efficiency and reliability at a budget-friendly cost
Perfect for 1/10 scale vehicles, trucks, and buggies
Features a huge capability for extended run times and a massive C rating so you'll have all the power you'll ever need
Consists of a Deans-type port on the discharge leads

Requirements

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g

Get this item to improve the one you read about.

Gear Set Scorpion Crawler

This is the Gear Set for the Axial Scorpion Rock Crawler.

FEATURES:
Plastic building, black in color

INCLUDES:
One gear set

NEEDS:
Installation on the Rock Crawler

This item is frequently purchased with the above mentioned item.

Bearing 5x11x4mm

This is a set of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

INCLUDES:
Two Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Size: 5mm
Outside Size: 11mm
Density: 4mm

Lots of others have purchased this item along with the item that you are currently reviewing.

Bearing 8x16x5mm

This is a set of replacement 8x16x5mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Sealed design assists keep the bearing running smooth and friction totally free

INCLUDES:
Two Bearings

NEEDS:
Installation following the design manual

SPECS:
Inside Size: 8mm
Outside Size: 16mm
Density: 5mm