Axial Bearing 10x15x4mm

This is a pair of replacement 10x15x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Shielded to assist keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Inside Size: 10mm
Outside Size: 15mm
Density: 4mm

This product praises the above discussed product.

Bearing 5x11x4mm

This is a pair of replacement 5x11x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Sealed design assists keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Inside Size: 5mm
Outside Size: 11mm
Density: 4mm

Want another great product to match the above discussed product?

Bearing 5x10x4mm

This is a pair of replacement 5x10x4mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless steel building, silver in color
Sealed design assists keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Inside Size: 5mm
Outside Size: 10mm
Density: 4mm

Often gotten with the product that you are currently reading about.

Bearing 8x16x5mm

This is a pair of replacement 8x16x5mm Bearings for the
Axial AX10 Scorpion Rock Crawler.

FEATURES:
Stainless-steel building, silver in color
Sealed design assists keep the bearing running smooth and friction free

CONSISTS OF:
Two Bearings

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Inside Size: 8mm
Outside Size: 16mm
Density: 5mm

Right here is another product that praises the product being discussed.



These are the CNC Machined Accuracy Aluminum Steering Knuckles
For the Axial Wraith

FUNCTIONS:
Our CNC Machined Aluminum Front Steering knuckles greatly enhances
the toughness on your Axial Wraith, and enhances the steering
reaction by taking out any flex of the stock plastic device. The
C-Hubs likewise includes more toughness and eliminate any undesirable flex for
the Axial Wraith and it has the same dimensions and adjustability as
the stock plastic unit.

These knuckles are anodized black in color.

INCLUDES:
Two guiding knuckles
Four M39x9mm cap head screws with hex sockets

SPECIFICATIONS:
Length: 1-3/4" (44mm)
Width: 7/16" (36mm)
Height: 1-1/4" (32mm)

REMARKS:
These knuckles can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)

Right here is a great product that lots of others have bought at the exact same time.

Lectron Pro 7.4V 5200mAh 50C Lipo Deans

5200mAh 50C for under $50!
This 2-cell 5200mAh 50C lipo is best for 1/10 scale automobiles, trucks, and buggies! Features a big capability for prolonged run times and a gigantic C rating so you'll have all the power you'll ever require. Includes a Deans-type connector on the discharge leads.
Features

High-end efficiency and dependability at a budget friendly rate
Perfect for 1/10 scale automobiles, trucks, and buggies
Features a big capability for prolonged run times and a gigantic C rating so you'll have all the power you'll ever require
Includes a Deans-type connector on the discharge leads

Specifications

Length: 138 mm
Width: 47 mm
Height: 25 mm
Weight: 266 g