Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum building and construction
Compression install, two screws set up on either side of arm and
    tighten up center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
Two 2x8mm socket head screws

SPECIFICATIONS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Size: 3mm
Pitch:3x30

Lots of others have bought this thing in addition to the thing that you are presently reading about.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget friendly water resistant digital servo with excellent torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge technology with very high 12-bit (4096) resolution and metal equipments for your greater precision when dodging puddles. This is a great upgrade if your aiming to drive your RC car in any condition...rain, sleet, or snow.

Features:

• Combines cutting edge
  technology with very high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Exceptionally strong metal equipments ensure long-life and durability.
• Our servos are totally green ? from products to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Right here is a great thing that lots of others have purchased the very same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than standard Ni-Cd or Ni-Mh batteries while offering improved performance and run times. It utilizes the exact same balancing connection as Align or Electrifly battery chargers. Make certain to use a voltage cut off if your speed control does not come equipped with one. ONLY USE A CHARGER SPECIFICALLY FOR Li-Poly cells!!!

The listed below thing also sets truly well with the thing being talked about.

Steering Upgrade Kit

This is the Steering Upgrade Kit by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic guiding links
This package will increase guiding strength and precision

INCLUDES:
Plastic linkage set
Two aluminum linkage rods
Mounting hardware
In-depth guidelines

REQUIRES:
Installation on model

This thing praises the main item below.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a protected connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering ports onto wires

You will certainly love this product if you have the product previously pointed out.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Spider Brushed Motor.

FEATURES:
High-strength updated ferrite magnets
Legal for rock crawling competitions
Completely rebuildable
Double precision ball bearings
120 day minimal warranty

INCLUDES:
Tekin T35 HD 35 Turn Rock Spider Brushed Motor

REQUIRES:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion gear depending on car

SPECIFICATIONS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Dimensions: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)