Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum building
Compression mount, two screws set up on either side of arm and
    tighten up center hole around servo spline

CONSISTS OF:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECS:
Length: 0.98" (25mm) from center of servo installing hole to end of arm
Hole Size: 3mm
Pitch:3x30

Many others have gotten this item in addition to the item that you are presently reviewing.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly water resistant digital servo with terrific torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge innovation with super high 12-bit (4096) resolution and metal gears for your greater accuracy when evading puddles. This is a great upgrade if your seeking to drive your RC vehicle in any condition...rain, sleet, or snow.

Features:

• Combines cutting edge
  innovation with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Extremely strong metal gears guarantee long-life and durability.
• Our servos are absolutely green ? from materials to production, these servos are environmentally friendly.
• Ideal for RC cars, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Right here is a excellent item that numerous others have bought at the exact same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than standard Ni-Cd or Ni-Mh batteries while offering enhanced efficiency and run times. It utilizes the same balancing connection as Align or Electrifly chargers. Make certain to use a voltage cut off if your speed control does not come geared up with one. ONLY USAGE A BATTERY CHARGER PARTICULARLY FOR Li-Poly cells!!!

The below item also sets really well with the item being gone over.

Steering Upgrade Kit

This is the Steering Upgrade Kit by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Changes the stock plastic steering links
This kit will increase steering strength and accuracy

CONSISTS OF:
Plastic linkage set
2 aluminum linkage rods
Installing hardware
Detailed guidelines

REQUIRES:
Installation on design

This item praises the main item right here.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design gets rid of the possiblility of reverse polarity connections.
Provides a safe and secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering connectors onto wires

You will certainly love this item if you have the item above pointed out.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Spider Brushed Motor.

FEATURES:
High-strength upgraded ferrite magnets
Legal for rock crawling competitors
Entirely rebuildable
Dual accuracy ball bearings
120 day minimal service warranty

CONSISTS OF:
Tekin T35 HD 35 Turn Rock Spider Brushed Motor

REQUIRES:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion equipment depending upon vehicle

SPECS:
Input Voltage: 3S LiPo or 10-cell NiMH battery
Measurements: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)