Axial Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Hard anodized aluminum building and construction
Compression install, two screws install on either side of arm and
    tighten center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Size: 3mm
Pitch:3x30

Many others have actually acquired this item in addition to the item that you are currently reviewing.

Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly water resistant digital servo with fantastic torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with incredibly high 12-bit (4096) resolution and metal gears for your higher accuracy when dodging puddles. This is a great upgrade if your wanting to drive your RC automobile in any condition...rain, sleet, or snow.

Functions:

• Integrates cutting edge
  innovation with incredibly high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Exceptionally strong metal gears make sure long-life and durability.
• Our servos are totally green ? from products to production, these servos are environmentally friendly.
• Ideal for RC cars, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Equipment: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

Here is a fantastic item that several others have actually purchased the exact same time.



Racers Edge 25C 5000 mAh 2S1P LI-Poly Battery hardwired with Deans Ultra Plug. Racers Edge battery is lighter than traditional Ni-Cd or Ni-Mh batteries while offering enhanced efficiency and run times. It utilizes the same balancing connection as Align or Electrifly chargers. Be sure to use a voltage cut off if your speed control does not come geared up with one. ONLY USE A CHARGER SPECIFICALLY FOR Li-Poly cells!!!

The listed below item also pairs really well with the item being gone over.

Steering Upgrade Kit

This is the Steering Upgrade Package by Axial
for usage on Axial AX10 and SCX10.

FEATURES:
Replaces the stock plastic guiding links
This kit will increase guiding strength and accuracy

INCLUDES:
Plastic linkage set
2 aluminum linkage rods
Installing hardware
In-depth instructions

REQUIRES:
Installation on design

This item praises the main item below.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering adapters onto wires

You will certainly love this product if you have the product previously mentioned.

Rock Crawler Brushed Motor 35T HD

This is the Tekin T35 HD 35 Turn Rock Crawler Brushed Motor.

FEATURES:
High-strength upgraded ferrite magnets
Legal for rock crawling competitions
Completely rebuildable
Double accuracy ball bearings
120 day restricted service warranty

INCLUDES:
Tekin T35 HD 35 Turn Rock Crawler Brushed Motor

REQUIRES:
ESC such as the Tekin FXR Brushed ESC, TEKM1091
Motor leads
Pinion equipment depending on automobile

SPECS:
Input Voltage: THREE LiPo or 10-cell NiMH battery
Measurements: 2.07 x 1.42" (52.7 x 36mm)
Shaft Size: 0.125" (3.2mm)
Bearing Size: 3/8 x 1/8"
Motor Weight: 5.98oz (169g)