Axial Aluminum Hub Narrow 12mm Black (4)

These are the 12mm Narrow Aluminum Hex Hubs from Axial.

FEATURES:
Aluminum building and construction, black in color
Replaces worn or broken hex centers

SUCHES AS:
4 aluminum hex centers
4 steel drive pins
4 set screws

NEEDS:
Setup following the design manual

SPECS:
Hex Size: .47" (12mm)

This item is often acquired with the above mentioned item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

SUCHES AS:
2 Ball Bearings

NEEDS:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one required).

You will enjoy this item if you have the item previously pointed out.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of very strong composite product
Gray aluminum ring
Fits 12mm hex centers
True beadlock design, no untidy gluing needed

SUCHES AS:
2 Axial 2.2 Beadlock Wheels in Black with ring installing hardware

NEEDS:
Tires of modeler's choice

SPECS:
Width: 1.4" (36mm)
Beadlock Diameter: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

The listed below item additionally sets actually well with the item being gone over.

55T Electric Motor

This is the Axial 55T Rock Spider Electric Motor.

FEATURES:
Gear up or update the Axial AX10 RTR or other rock crawlers for more
    low end pull and slower speed while crawling than stock 27 turn
    motors
Preinstalled bullet ports, no soldering needed

SUCHES AS:
Axial 55T Rock Spider Electric Motor with bullet ports

NEEDS:
Compatible speed control for rock crawler motors

SPECS:
Shaft Diameter: 3.2mm (0.12")
Shaft Length: 12.5mm (0.49")
Can Diameter: 36mm (1.4")
Can Length: 50.75 (2")
Weight: 164g (5.8oz)
Installing Pattern: 25mm (0.98" )
Wire length: 115mm (4.5")
Input Voltage: 4+ cells (12VDC) max

This item is often acquired with the above mentioned item.

Diff Gasket 16x25x0.5mm

    This is a set of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building and construction, grey in color
Replaces worn or broken differential gaskets

SUCHES AS:
2 Differential Gaskets

NEEDS:
Setup following the design manual

SPECS:
Outside Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Thickness: .020" (.52mm)

This item praises the main item below.

Pinion 48P 14T Steel

This is the optional 48 Pitch 14 Tooth Steel Pinion Gear
for the Axial Wraith Rock Racer, AXID9018.

FEATURES:
Constructed of hardened steel for long life

SUCHES AS:
48 Pitch 14 Tooth Steel Pinion Gear with Set Screw

NEEDS:
Securing to motor shaft

SPECS:
Gear Pitch: 48
Variety of Teeth: 14

Below is a terrific item that several others have bought at the very same time.

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FUNCTIONS:
Aluminum building and construction, black in color
Replaces worn or broken hex centers

SUCHES AS:
4 aluminum hex centers
4 steel drive pins
4 set screws

NEEDS:
Setup following the design manual

SPECS:
Diameter: .47" (12mm)