Axial Aluminum Hub Narrow 12mm Black (4)

These are the 12mm Narrow Aluminum Hex Hubs from Axial.

FEATURES:
Aluminum building, black in color
Replaces used or damaged hex hubs

CONSISTS OF:
4 aluminum hex hubs
4 steel drive pins
4 set screws

REQUIRES:
Installation following the design manual

SPECIFICATIONS:
Hex Size: .47" (12mm)

This product is often acquired with the above pointed out product.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one needed).

You will certainly enjoy this item if you have the item just above stated.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
Eight hole design, constructed of very strong composite material
Gray aluminum ring
Fits 12mm hex hubs
True beadlock design, no unpleasant gluing needed

CONSISTS OF:
Two Axial 2.2 Beadlock Wheels in Black with ring installing hardware

REQUIRES:
Tires of modeler's option

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Size: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

The below product additionally pairs really well with the product being reviewed.

55T Electric Motor

This is the Axial 55T Rock Crawler Electric Motor.

FEATURES:
Gear up or update the Axial AX10 RTR or other rock spiders for more
    low end pull and slower speed while crawling than stock 27 turn
    motors
Preinstalled bullet adapters, no soldering needed

CONSISTS OF:
Axial 55T Rock Crawler Electric Motor with bullet adapters

REQUIRES:
Suitable speed control for rock crawler motors

SPECIFICATIONS:
Shaft Size: 3.2mm (0.12")
Shaft Length: 12.5mm (0.49")
Can Size: 36mm (1.4")
Can Length: 50.75 (2")
Weight: 164g (5.8oz)
Mounting Pattern: 25mm (0.98" )
Wire length: 115mm (4.5")
Input Voltage: 4+ cells (12VDC) max

This product is often acquired with the above pointed out product.

Diff Gasket 16x25x0.5mm

    This is a set of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber building, grey in color
Replaces used or damaged differential gaskets

CONSISTS OF:
Two Differential Gaskets

REQUIRES:
Installation following the design manual

SPECIFICATIONS:
Outdoors Size: 1" (25mm)
Inside Size: .67" (17mm)
Thickness: .020" (.52mm)

This product compliments the main item below.

Pinion 48P 14T Steel

This is the optional 48 Pitch 14 Tooth Steel Pinion Equipment
for the Axial Wraith Rock Racer, AXID9018.

FEATURES:
Constructed of solidified steel for long life

CONSISTS OF:
48 Pitch 14 Tooth Steel Pinion Equipment with Set Screw

REQUIRES:
Attaching to motor shaft

SPECIFICATIONS:
Equipment Pitch: 48
Number of Pearly whites: 14

Right here is a excellent product that numerous others have bought at the exact same time.

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FEATURES:
Aluminum building, black in color
Replaces used or damaged hex hubs

CONSISTS OF:
4 aluminum hex hubs
4 steel drive pins
4 set screws

REQUIRES:
Installation following the design manual

SPECIFICATIONS:
Size: .47" (12mm)