Axial Aluminum Hub Narrow 12mm Black (4)

These are the 12mm Narrow Aluminum Hex Hubs from Axial.

FEATURES:
Aluminum construction, black in color
Changes used or damaged hex centers

INCLUDES:
Four aluminum hex centers
Four steel drive pins
Four set screws

REQUIRES:
Installation following the design handbook

SPECIFICATIONS:
Hex Size: .47" (12mm)

This thing is often gotten with the above discussed thing.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

INCLUDES:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

You will like this product if you have the product earlier pointed out.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of extremely strong composite material
Gray aluminum ring
Fits 12mm hex centers
Real beadlock design, no untidy gluing needed

INCLUDES:
2 Axial 2.2 Beadlock Wheels in Black with ring mounting hardware

REQUIRES:
Tires of modeler's option

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Diameter: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

The below thing likewise sets truly well with the thing being gone over.

55T Electric Motor

This is the Axial 55T Rock Spider Electric Motor.

FEATURES:
Equip or upgrade the Axial AX10 RTR or other rock spiders for more
    low end pull and slower speed while crawling than stock 27 turn
    motors
Preinstalled bullet connectors, no soldering needed

INCLUDES:
Axial 55T Rock Spider Electric Motor with bullet connectors

REQUIRES:
Compatible speed control for rock crawler motors

SPECIFICATIONS:
Shaft Diameter: 3.2mm (0.12")
Shaft Length: 12.5mm (0.49")
Can Diameter: 36mm (1.4")
Can Length: 50.75 (2")
Weight: 164g (5.8oz)
Installing Pattern: 25mm (0.98" )
Wire length: 115mm (4.5")
Input Voltage: 4+ cells (12VDC) max

This thing is often gotten with the above discussed thing.

Diff Gasket 16x25x0.5mm

    This is a set of replacement Differential Gaskets
for the Axial AX10 Scorpion Rock Crawler.

FEATURES:
Fiber construction, grey in color
Changes used or damaged differential gaskets

INCLUDES:
2 Differential Gaskets

REQUIRES:
Installation following the design handbook

SPECIFICATIONS:
Outside Diameter: 1" (25mm)
Inside Diameter: .67" (17mm)
Density: .020" (.52mm)

This thing praises the main item here.

Pinion 48P 14T Steel

This is the optional 48 Pitch 14 Tooth Steel Pinion Gear
for the Axial Wraith Rock Racer, AXID9018.

FEATURES:
Constructed of solidified steel for long life

INCLUDES:
48 Pitch 14 Tooth Steel Pinion Gear with Set Screw

REQUIRES:
Fastening to motor shaft

SPECIFICATIONS:
Gear Pitch: 48
Number of Teeth: 14

Right here is a excellent thing that several others have purchased the same time.

Aluminum Hex Hub 12mm Black (4)

These are the 12mm Aluminum Hex Hubs for the Axial Scorpion

FEATURES:
Aluminum construction, black in color
Changes used or damaged hex centers

INCLUDES:
Four aluminum hex centers
Four steel drive pins
Four set screws

REQUIRES:
Installation following the design handbook

SPECIFICATIONS:
Diameter: .47" (12mm)